Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VAS5054A PCB Difference
11-10-2017, 16:12 PM,
Post: #131
|
|||
|
|||
RE: VAS5054A PCB Difference
(11-10-2017, 05:11 AM)ninja_zx11 Wrote: Today i received 2 TJA1055T from arrow.I first soldered it to the clone i got from the same seller as apoelistas got his.It did not make any difference.I had already removed all 3 fake TJA1054,OKI and a5780a chips from it.I was getting 700.2114 before soldering and got same error after soldering.So no changes on that clone.So it looks like something else is bad on it.VAS5054A ERRORS 700.2116 Fault on vehicle bus access J1850-VPW - FAKE AU5780A OR INVERSED 700.2115 Fault on vehicle bus access J1850-PWM - FAKE OKI M6636 OR MISSING OR CUT LEG OR INVERSED So is clear, you have fake oki If you like my post and it helped you please press
|
|||
11-10-2017, 16:16 PM,
Post: #132
|
|||
|
|||
RE: VAS5054A PCB Difference
Mine has the clicks (relay is activated), and then fails the A5780A test because it's fake on mine (chip was likely sanded down and laser inscribed, you can still see sanding marks).
Test ends there. It will not go to OKI test when A5790A fails. But I would like to know the test sequence too. I'm finished with looking for genuine A5780A and OKI, these are obsolete chips from over 10 years ago, and it will not improve the tool for VW/Audi/Mercedes/BMW use in any possible way. |
|||
11-10-2017, 16:18 PM,
Post: #133
|
|||
|
|||
RE: VAS5054A PCB Difference
Hi
where is stored the interface serial number ? |
|||
11-10-2017, 16:43 PM,
(This post was last modified: 11-10-2017, 16:46 PM by ninja_zx11.)
Post: #134
|
|||
|
|||
RE: VAS5054A PCB Difference
(11-10-2017, 16:16 PM)Enabled Wrote: Mine has the clicks (relay is activated), and then fails the A5780A test because it's fake on mine (chip was likely sanded down and laser inscribed, you can still see sanding marks). I am almost done with it too...Waste of time and money.My last shipment of these 2 chips will be coming in 2-3 weeks and if it works,then good and if it won't then i am done. (11-10-2017, 16:12 PM)fantomel Wrote:So does it mean that having 700.2115 , it has already passed 700.2116 (AU5780A test) and AU5780a is good?(11-10-2017, 05:11 AM)ninja_zx11 Wrote: Today i received 2 TJA1055T from arrow.I first soldered it to the clone i got from the same seller as apoelistas got his.It did not make any difference.I had already removed all 3 fake TJA1054,OKI and a5780a chips from it.I was getting 700.2114 before soldering and got same error after soldering.So no changes on that clone.So it looks like something else is bad on it.VAS5054A ERRORS |
|||
11-10-2017, 17:19 PM,
Post: #135
|
|||
|
|||
RE: VAS5054A PCB Difference
Sounds like you do have a working au5780a, and failed OKI.
It's a shame that you had fake TJA1054 though. But at least those kinds of mistakes are easily fixed. |
|||
11-10-2017, 17:28 PM,
Post: #136
|
|||
|
|||
RE: VAS5054A PCB Difference
|
|||
Reputation: +1 - fantomel [+1] | |||
11-10-2017, 18:50 PM,
(This post was last modified: 11-10-2017, 18:53 PM by fantomel.)
Post: #137
|
|||
|
|||
RE: VAS5054A PCB Difference
So does it mean that having 700.2115 , it has already passed 700.2116 (AU5780A test) and AU5780a is good?
answer: BINGO and a small hint for others in need: AU5780=HIP7020AB(only) ebay is your friend if you are in need (11-10-2017, 17:28 PM)Marcos Wrote:and not only there(11-10-2017, 16:18 PM)chora Wrote: Hi |