Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Newbie help Alfa GT Tuning
03-12-2017, 07:34 AM,
(This post was last modified: 03-12-2017, 08:10 AM by Kenny.)
Post: #1
|
|||
|
|||
Newbie help Alfa GT Tuning
I am playing around trying to see if performance tuning is for me or not.
I have a relative who is a big Alfa fan that wanted a map for his car. 2005 Alfa Gt 1.9 JTD 16valve 110kw (150hp) edc16. He had egr problems and we used software on forum to egr delete. It has worked and no faults came back. He did a bit of homework and wanted file done by specific on line service. Needless to say he is not happy with the file. He says he does not really feel any difference. When i look at the map most of the changes are all at upper end and nothing really on bottom end. He says the car is flat on pull off and low down power. So the car is mostly used for town driving. I have been playing and found another original file to compare. I'm a beginner so don't know how to compare files in Winols yet so using ECM titanium. If i compare my original file with donar original file i get a difference in Torque request during standard conditions. The difference is 30 percent from low down all the way up. I loaded the map to the car just for test purpose and he liked the response. My questions are: 1. Is it safe and can i add these values to the purchased modified map? 2. Is the purchased modified map any good? 3. In the original map torque request on take off and torque request during standard condition are the same. Can i apply these changes to torque request on take off map? 4. Is there any other pointers someone can share for a reliable map with quick response? 5. Does anyone have a good tuned map i can compare with? Thanks ps. In rar file is ori file, EGR off file, compared ori - file and purchased file. And incase i cant add image to forum , screen shot of torque request difference. |