Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E-sys ICOM connection issue
28-02-2018, 14:03 PM,
(This post was last modified: 28-02-2018, 14:08 PM by Spirit5676.)
Post: #1
|
|||
|
|||
E-sys ICOM connection issue
Hi,
I'm trying to trouble shoot the issue with my ICOM A2 clone. I found out that I can't connect with ICOM to F-series. I get the following error: "Connection check failed. Gateway/ECUs are not correctly connected or not responding. However Functions using the ODX-Data can be used. [G188]" I've tried F30 and F10. If I use ENET cable esys works fine. I've locked ICOM with Itoolradal. I'm using E-sys 3.31.0, with token master laucher pro 3.0.4.90 sp-daten 63.3. In ediabas.ini: Under TCP: Interface= REMOTE Remotehost = 169.254.92.38 Port = 6801 Under Xethernet Interface= REMOTE Remotehost = 169.254.92.38 DiagnosticPort = 6801 Itoolradar and ISTA+ both show the IP: 169.254.92.38. Windows 10x64, windows firewall off and windows defender turned off. Wlan disabled. ICOM works with INPA, NCS Expert, Winkpf. With ISTA+ I can read codes from F-series, software update isn't working. |
|||
28-02-2018, 14:13 PM,
Post: #2
|
|||
|
|||
RE: E-sys ICOM connection issue
Try update firmware of your ICOM. I have problem with G series which was solved by update.
BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting Online help by TeamViewer CID Changeable SD cards! 100% working! |
|||
28-02-2018, 14:46 PM,
Post: #3
|
|||
|
|||
RE: E-sys ICOM connection issue
|
|||
28-02-2018, 16:31 PM,
(This post was last modified: 28-02-2018, 16:32 PM by user_530d.)
Post: #4
|
|||
|
|||
RE: E-sys ICOM connection issue
You don't need ediabas.ini configuration.
Use in e-sys connection-manager ICOM/Ethernet with tcp://169.254.92.38:50160 See screenshot, use your ip. Edit: Sorry, german screenshot. (28-02-2018, 14:46 PM)Spirit5676 Wrote:(28-02-2018, 14:13 PM)kmodel99 Wrote: Try update firmware of your ICOM. I have problem with G series which was solved by update. If my post helped you hit the thanks and reputation button. Thank you.
|
|||
28-02-2018, 20:02 PM,
Post: #5
|
|||
|
|||
RE: E-sys ICOM connection issue
I need ediabas, because I'm using INPA etc.
Anyways installing software on different laptop solved the issue. I installed both laptops just the same, so I'm not sure what the issue is with the other laptop. |
|||
01-02-2019, 17:20 PM,
Post: #6
|
|||
|
|||
RE: E-sys ICOM connection issue
(28-02-2018, 16:31 PM)user_530d Wrote: You don't need ediabas.ini configuration. Any solution to connect E-SYS wireless? Laptop to router via lan cable and router to icom wireless ISTA+ works ok but E-SYS does not connect thank you |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content