Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Cannot clear fault codes at DME and EGS
19-09-2018, 22:18 PM,
Post: #1
|
|||
|
|||
Cannot clear fault codes at DME and EGS
Hi,
I AM New AT THIS FORUM SO FIRST OF ALL THANKS FOR ACCEPTING ME. I AM USING ISTA D VERSION 4.13.14. I am having an issue when trying to clear fault codes at DME and EGS. I select DME or EGS, then call up ECU functions , then triger components, then clear faul codes and once selected, on the right side of the screen, it appears a msg saying: "This function has been deactivated due to obdII legislation". Do you have any idea why this function has been deactivated? My car was recently updated to i level 18-07-531 by the local BMW dealer and from then I cannot clear faul codes over these two modules. I could clear other errors that were present at IKha and FEM modules, but these other two modules show this msg. My car is a BMw 330 Sport Line year model 2016 AT. Thanks in advance |
|||
20-09-2018, 09:44 AM,
Post: #2
|
|||
|
|||
RE: Cannot clear fault codes at DME and EGS
Then clear fault codes regular way
|
|||
20-09-2018, 10:11 AM,
Post: #3
|
|||
|
|||
RE: Cannot clear fault codes at DME and EGS
|
|||
20-09-2018, 13:03 PM,
Post: #4
|
|||
|
|||
RE: Cannot clear fault codes at DME and EGS
|
|||
20-09-2018, 14:35 PM,
Post: #5
|
|||
|
|||
RE: Cannot clear fault codes at DME and EGS
(20-09-2018, 13:03 PM)torchia Wrote:(20-09-2018, 10:11 AM)ferbmw Wrote:(20-09-2018, 09:44 AM)inspi1981 Wrote: Then clear fault codes regular way ok. I did this today and I had to emulate a fault ( I disconet the MAF sensor ) and trigered the error. At that moment I tried to clear faul codes through the DME and again , showed the same msg. Then I look for the error in the general screen, and from there I could clear all ECUs, including DME. In the past, if there were some errors, I entered each ecu and cleared the faul codes from each one. It seems in this ista version, (or for this level 18-07-531??? ) , has been configured to clear fault codes through the general screen instead from from each ECU. However this is correct for DME en EGS; rest of the ECUs can be cleared from each module. |
|||
21-09-2018, 04:33 AM,
Post: #6
|
|||
|
|||
RE: Cannot clear fault codes at DME and EGS
So much time consuming
|
|||
21-09-2018, 05:20 AM,
Post: #7
|
|||
|
|||
RE: Cannot clear fault codes at DME and EGS
First question is: which codes the DME and EGS have that you want to delete?
Per the error description DME and EGS maybe looking at some error or failed component/sensor that has not been replaced For diagnosis follow the test plan if not faults found ISTA D may want to update the software in DME and EGS before allowing to delete the faults. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Disable CC messages relating to a CC-ID codes | TheNine90 | 126 | 17,353 |
01-06-2024, 18:32 PM Last Post: kimz |
|
BMW G30 D19DE7 and D35903 error codes | flausatu | 0 | 53 |
30-05-2024, 07:12 AM Last Post: flausatu |
|
Bmw x1 f48 disabled fault | kuki88 | 7 | 302 |
17-05-2024, 08:00 AM Last Post: kuki88 |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 1 | 168 |
30-04-2024, 19:37 PM Last Post: gabur431 |
|
How to clear the old FemtoFSC of EVO | appeti | 7 | 608 |
23-04-2024, 05:50 AM Last Post: brag288 |
|
Requesting fsc DEBLOCKING codes 0x1AA for Headunit | BMWF01 | 1 | 166 |
21-04-2024, 10:05 AM Last Post: BugFix |
|
Requesting FSC enabling codes for BMW F40 | BMWF01 | 3 | 226 |
10-04-2024, 10:10 AM Last Post: RuleNormaliai |
|
M3 F80 LCI Airbag fault | Stefan1251 | 8 | 460 |
25-03-2024, 00:18 AM Last Post: armenh7 |
|
bmw fault code46d1 | wassim | 4 | 288 |
09-03-2024, 07:58 AM Last Post: wassim |
|
NEED FA CODES FROM VIN E92 | tigre | 1 | 139 |
28-02-2024, 17:41 PM Last Post: nBlacky |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content