Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
M2C Oil measurement inactive after DME Change
13-04-2022, 16:04 PM,
Post: #1
|
|||
|
|||
M2C Oil measurement inactive after DME Change
Hi Guys,
maybe somebody can help for this issue. We've replaced DMEs on four cars, on every car oil messurement was working fine, also dme works fine after replacement. Just Oil messurement won't work. ISTA shows correct values of oil quality, temp and niveau, but messurement in iDrive ist "actual inactive". Trying to recode DME is done, but no effect. Thanks for help! |
|||
13-04-2022, 16:44 PM,
Post: #2
|
|||
|
|||
RE: M2C Oil measurement inactive after DME Change
ecu was cloned or was changed isn?
BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
13-04-2022, 16:53 PM,
Post: #3
|
|||
|
|||
RE: M2C Oil measurement inactive after DME Change
|
|||
14-04-2022, 20:04 PM,
Post: #4
|
|||
|
|||
RE: M2C Oil measurement inactive after DME Change
Did you use 06/2018+ hardware DME or any old S55 DME? hwel changed with 06/2018
|
|||
15-04-2022, 13:56 PM,
Post: #5
|
|||
|
|||
RE: M2C Oil measurement inactive after DME Change
HWEL matched….SWFL flash also without problems, no svt or vo edit necessary.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content