Possibly Related Threads…

***BMWF750GS*** · 24-06-2022, 18:18 PM,

I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

***elthox*** · 24-06-2022, 22:31 PM,

(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

whats the current firmware? Did you try to update it?

***BMWF750GS*** · 24-06-2022, 23:23 PM,

(24-06-2022, 22:31 PM)elthox Wrote:
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

whats the current firmware? Did you try to update it?

Originally is 3.15.08 firmware, I want to upgrade 4.22.11, upgrade after the problem!

***Diagmaister*** · (This post was last modified: 25-06-2022, 00:11 AM by Diagmaister.)

(24-06-2022, 23:23 PM)BMWF750GS Wrote:
(24-06-2022, 22:31 PM)elthox Wrote:
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

whats the current firmware? Did you try to update it?
Originally is 3.15.08 firmware, I want to upgrade 4.22.11, upgrade after the problem!

Upgrade firmware maybe solves the problem if not the hardware issue

(24-06-2022, 23:23 PM)BMWF750GS Wrote:
(24-06-2022, 22:31 PM)elthox Wrote:
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

whats the current firmware? Did you try to update it?
Originally is 3.15.08 firmware, I want to upgrade 4.22.11, upgrade after the problem!

Upgrade firmware maybe solves the problem if not the hardware issue

***BMW888*** · 25-06-2022, 05:36 AM,

(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

Copy firmware(any version) to a FAT32 USB then insert it to icom next. Power off ICOM press and hold reset button. Now power on icom. when you see icom system led light green release reset button. In 5 seconds press reset button 3 times. you will see all leds flashing in red. Wait it until all leds flash green. Done

***BMWF750GS*** · 25-06-2022, 10:28 AM,

(25-06-2022, 05:36 AM) BMW888 Wrote:
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

Copy firmware(any version) to a FAT32 USB then insert it to icom next. Power off ICOM press and hold reset button. Now power on icom. when you see icom system led light green release reset button. In 5 seconds press reset button 3 times. you will see all leds flashing in red. Wait it until all leds flash green. Done

So is the recovery button the one next to the network port, or the white one?

***Lightred*** · 25-06-2022, 10:43 AM,

(25-06-2022, 10:28 AM)BMWF750GS Wrote:
(25-06-2022, 05:36 AM) BMW888 Wrote:
(24-06-2022, 18:18 PM)BMWF750GS Wrote: I hope everyone can give me advice on repair ! My original ICOM Next A could not recognize the vehicle voltage, The rest is normal., but sometimes the LED would incorrectly flash four red lights, which could be seen normally on the ITool Radar! A Smart Fusion error is displayed. How to restore ICOM Next, Can someone give me the ICOM Next A recovery file ? The button next to the network port does not start recovery mode! What's the right way to do it?

Thank you for your answers!!!

Copy firmware(any version) to a FAT32 USB then insert it to icom next. Power off ICOM press and hold reset button. Now power on icom. when you see icom system led light green release reset button. In 5 seconds press reset button 3 times. you will see all leds flashing in red. Wait it until all leds flash green. Done
So is the recovery button the one next to the network port, or the white one?

The white one.

***Diagmaister*** · 25-06-2022, 13:13 PM,

Did you flash new firmware?

***BMWF750GS*** · 25-06-2022, 13:35 PM,

(25-06-2022, 13:13 PM)Diagmaister Wrote: Did you flash new firmware?

I have upgraded the firmware and now it shows 4.22.11!

***emmike*** · 25-06-2022, 14:00 PM,

(25-06-2022, 13:35 PM)BMWF750GS Wrote:
(25-06-2022, 13:13 PM)Diagmaister Wrote: Did you flash new firmware?

I have upgraded the firmware and now it shows 4.22.11!

4 red LED still showing after upgrading the firmware?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	[MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	113	37,772	23-05-2024, 15:42 PM Last Post: hashtagmaster
	ICOM resetting with 4.47	mcrussell	13	573	21-05-2024, 13:39 PM Last Post: NeRkO20
	Bmw x1 f48 disabled fault	kuki88	7	296	17-05-2024, 08:00 AM Last Post: kuki88
	How to use ICOM with BMW VirtualGT1	qeen	0	120	09-05-2024, 18:55 PM Last Post: qeen
	DDE509 Internal fault 7 code 4703	GoNz0-	1	159	30-04-2024, 19:37 PM Last Post: gabur431
	ICOM Firmware (NEXT & A2) always current!	Vojno	206	44,389	12-04-2024, 23:36 PM Last Post: bennymx
	Poor wifi signal from new ICOM's	bmchicago	3	370	12-04-2024, 18:55 PM Last Post: Node
	Solved ✔ ICOM NEXT Error	bmwcare	4	2,552	01-04-2024, 11:34 AM Last Post: ivanp
	CCC flash WINKFP ICOM	BimmerSLO	9	419	29-03-2024, 19:17 PM Last Post: Hoborg
	M3 F80 LCI Airbag fault	Stefan1251	8	449	25-03-2024, 00:18 AM Last Post: armenh7

Contact Us