Possibly Related Threads…

***thecarfixer*** · 29-06-2023, 15:22 PM,

See my other thread, I’m going through a manual conversion on my R55 (mini clubman). I’ve changed the VO, default coded modules and reprogrammed the DME, no fault codes are coming up.

Only problem is, ISTA D shows the EGS and there’s a no comms from EGS fault. The drive type on the car info is wrong too.

My question is: is that populated from the car somewhere, or is it stored in a database against the VIN?

I’d like to tidy that part up, if possible..

***Node*** · 29-06-2023, 15:36 PM,

(29-06-2023, 15:22 PM)thecarfixer Wrote: See my other thread, I’m going through a manual conversion on my R55 (mini clubman). I’ve changed the VO, default coded modules and reprogrammed the DME, no fault codes are coming up.

Only problem is, ISTA D shows the EGS and there’s a no comms from EGS fault. The drive type on the car info is wrong too.

My question is: is that populated from the car somewhere, or is it stored in a database against the VIN?

I’d like to tidy that part up, if possible..

Does this answer your question? From ISTA's diag database.

P.S. Have you updated FA in the car??? Could help.

***thecarfixer*** · 29-06-2023, 15:59 PM,

I did update the FA on both the CAS and FRM (verified but I’ll check again)

Looking at your pic, that seems to corroborate the idea that the assembly info in the ista database carries that build data..

***bmchicago*** · 29-06-2023, 21:59 PM,

not necessary to clean that data up. If all control units report no errors with missing EGS and FA and coding were done correctly, then move on to the next job.

***____ANGEL___*** · 29-06-2023, 22:49 PM,

Ista d uses vin db to identify, you can not correct this. The real check is in ista p for your car.

***thecarfixer*** · 30-06-2023, 06:02 AM,

Thanks, that makes sense. No errors other than the No comms to EGS, but that’s fine..

***Inerceptor*** · 30-06-2023, 10:56 AM,

Update with the correct SVT and MSM (in esys)

***Node*** · 30-06-2023, 11:02 AM,

(30-06-2023, 10:56 AM)Inerceptor Wrote: Update with the correct SVT and MSM (in esys)

R55 with Esys???? Would REALLY like to see that biggrin

***Inerceptor*** · 30-06-2023, 11:51 AM,

(30-06-2023, 11:02 AM)Node Wrote:
(30-06-2023, 10:56 AM)Inerceptor Wrote: Update with the correct SVT and MSM (in esys)

R55 with Esys???? Would REALLY like to see that

Yes)) time for vacation)))
Confused with F5x.

For R55 use older version ISTA (ex. 4.10-4.19) or change vin giggle

***thecarfixer*** · 30-06-2023, 20:17 PM,

Haha, gotcha. I’ll file it under ‘ignore’. And I’m sure the naysayers would just say buy a manual car..

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,767	700,419	Yesterday, 17:52 PM Last Post: Sedoy
	ISTA 4.33.30 The programming system could not be initialised	Edward1968	40	8,458	Yesterday, 09:50 AM Last Post: iyade46
	ISTA 4.46.xx problems and possible solution	Sedoy	131	16,184	31-05-2024, 13:32 PM Last Post: CATAHA
	Update ISTA at once 4.43.40 (ISTA Update Program)	charlesjyw	42	8,805	30-05-2024, 19:52 PM Last Post: mars13
	G30 changed lights to adaptive led lights indecators not working	iyade46	2	156	29-05-2024, 08:19 AM Last Post: iyade46
	ISTA+ 4.47.3x Install Files - MEGA	shawnsheridan	11	1,813	29-05-2024, 04:50 AM Last Post: ivanp
	Lowering g05 lci with ista	Zenel6GT	16	760	28-05-2024, 12:59 PM Last Post: NeRkO20
	ISTA 4.47 programming N/A	Neon10	7	469	28-05-2024, 07:46 AM Last Post: Thomas77
	ISTA 4.46.30 can't finish the diagnosis	spiridon	1	212	28-05-2024, 07:32 AM Last Post: flterence
	ISTA Czech Database ( 4.42.XX - 4.47.XX)	inspi1981	67	8,353	27-05-2024, 13:22 PM Last Post: inspi1981

Contact Us