Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Changed VO but ISTA still sees wrong transmission type
29-06-2023, 15:22 PM,
Post: #1
|
|||
|
|||
Changed VO but ISTA still sees wrong transmission type
See my other thread, I’m going through a manual conversion on my R55 (mini clubman). I’ve changed the VO, default coded modules and reprogrammed the DME, no fault codes are coming up.
Only problem is, ISTA D shows the EGS and there’s a no comms from EGS fault. The drive type on the car info is wrong too. My question is: is that populated from the car somewhere, or is it stored in a database against the VIN? I’d like to tidy that part up, if possible.. |
|||
29-06-2023, 15:36 PM,
Post: #2
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
(29-06-2023, 15:22 PM)thecarfixer Wrote: See my other thread, I’m going through a manual conversion on my R55 (mini clubman). I’ve changed the VO, default coded modules and reprogrammed the DME, no fault codes are coming up. Does this answer your question? From ISTA's diag database. P.S. Have you updated FA in the car??? Could help. |
|||
29-06-2023, 15:59 PM,
Post: #3
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
I did update the FA on both the CAS and FRM (verified but I’ll check again)
Looking at your pic, that seems to corroborate the idea that the assembly info in the ista database carries that build data.. |
|||
29-06-2023, 21:59 PM,
Post: #4
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
not necessary to clean that data up. If all control units report no errors with missing EGS and FA and coding were done correctly, then move on to the next job.
|
|||
29-06-2023, 22:49 PM,
Post: #5
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
Ista d uses vin db to identify, you can not correct this. The real check is in ista p for your car.
|
|||
30-06-2023, 06:02 AM,
Post: #6
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
Thanks, that makes sense. No errors other than the No comms to EGS, but that’s fine..
|
|||
30-06-2023, 10:56 AM,
Post: #7
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
Update with the correct SVT and MSM (in esys)
|
|||
30-06-2023, 11:02 AM,
Post: #8
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
|
|||
30-06-2023, 11:51 AM,
Post: #9
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
|
|||
30-06-2023, 20:17 PM,
Post: #10
|
|||
|
|||
RE: Changed VO but ISTA still sees wrong transmission type
Haha, gotcha. I’ll file it under ‘ignore’. And I’m sure the naysayers would just say buy a manual car..
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content