Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G01 Rear Camera Retrofit
|
21-01-2024, 20:59 PM,
Post: #1
|
|||
|
|||
|
BMW G01 Rear Camera Retrofit
one questions, i got retrofit set for G01 with BDC and it have 7 wires.
ICAM2-R have 8 pinout and one is not used. ICAM2 pinout : PIN 8 is WakeUp and is connected to A258*8B 54 PIN 7 is ground and is connected to Z10 PIN 6 PIN 5 PIN 4 is KL30B and is connected to Fuse F204 PIN 3 is not used PIN 2 PIN 1 whats about PIN 1,2 and 5,6? in BMW wiring diagram i can see only A258*9B PIN 38 and PIN 37 for ethernet, so where i have to put another 2 wires? |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
21-01-2024, 21:08 PM,
Post: #2
|
|||
|
|||
|
RE: BMW G01 Rear Camera Retrofit
Hello, pin 2, 6 and 7 is Ground
|
|||
|
|
|
21-01-2024, 21:15 PM,
Post: #3
|
|||
|
|||
|
RE: BMW G01 Rear Camera Retrofit
thank you! i was wondering because PIN2 have notice "BDC only for X3".
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content
