[dil6222]

My wires are measuring 37cm, am going to try cutting them short to 30cm, then I will try with resistors if it don't work I will try to remove them.
dl6222 can you please provide with the correct diagram and port settings? I will really appreciate. Thanks guys

Yes I'll find everything and add into this post shortly

Here we go i might be wrong but I'm sure 15-20 is max for cable length

connections .zip
File Type:
Downloaded:	60 times
Size:	1.62 MB

The other 2 pictures in zip are of my custom wiggler so you can just plug carprog to lpt port to port just solder connection wires tms TDI etc to the blank lpt port pins on back of carprog like this (see below ) it follows the normal connections of carprog to lpt with JTAG wiggler but in circuit board fashion so a lot easier
   

Then make a reset switch circuit for pin55 then you never even have to open carprog again when programming.