[dil6222]

I will always try to help others if I can.
And when you read a lot about changing parts you always read for carprog to change to m and then others say hct so what I'm saying is the info is there to read yourself and others too just some can't see it

---

For the record you don't have to replace all the 74xx
And you can even use the same 74hc125d piggybacked

---

I would also just like to add that I offer a repair service only and before I do, I always try to get the person to do the work themselves if they can.
I will always try to help someone if they want help this is just my nature.

Hello Domelec,

I don't understand when you said that you don't need to change all the 74xx ic. Could you explain me the reason?
I have a clone Carprog 7.28 (lib081105CAR001773I) and it doesn't read 95160 and 24Cxx eprooms. What components i have to change to repair it? Does the firmware must be change? I can send you some pictures if you wants
Thanks

There are a few more mods to be done apart from changing 74hc check a few pages back and there is a repair patch mod you can do which may help with eeprom reading
All the info is here on this thread pinouts mods firmware etc