Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CarProg All Questions/Answers Here!
04-07-2018, 11:15 AM,
(This post was last modified: 04-07-2018, 11:48 AM by Willail.)
Post: #796
|
|||
|
|||
RE: CarProg All Questions/Answers Here!
(29-06-2018, 05:00 AM)23Andi23 Wrote:(29-06-2018, 04:51 AM)Willail Wrote:(31-08-2015, 18:29 PM)DIMITYRMILEV Wrote: Change 4pcs 74hc125 whit 74hct125M smd in your carprog , and all will by ok. Hello, i have a clone carprog using solfware 7.28. Since i received it, it is impossible to read eeproms 95160 and 24cxx. I so used the software with airbag, but the ID of the Eproom is not recognised. The eprooms were desolder from the pcb and i used the A4 and A5 adapters provided with carprog. I have verified that the wires were correct with a multimeter (continuity test). I don't know if the changes of the 4 IC will help to read eprooms. I very dissapointed I don't test if antenna and CAN bus are working? How do i make it? Thanks for your reply (29-06-2018, 10:47 AM)23Andi23 Wrote:(29-06-2018, 10:00 AM)Willail Wrote: Hello, Hello, thank you for this reply. I will send you some picture of my carprog. Then , you will tell me if it is a good pcb. Can you give the main changes to make at the rear of the pcb because on the pictures, it is not easy to understand (remove some capacitors, remplace by a what? repair the hole line missing? Thanks (02-07-2018, 06:27 AM)kastanka Wrote:(30-06-2018, 17:27 PM)dil6222 Wrote:(30-06-2018, 04:49 AM)Willail Wrote:(25-12-2016, 08:55 AM)doslamer Wrote: Adapter A4 = adapter A6 by colors, but if do not upgrade your firmware of carprog with new one, you will never read 24xxx memory. Firmware till version 4.74 can not read 24xxx - china clone "bug" (bad firmware). Hello, could you explain me the changes that you made on your carprog for held reading and writing eprooms? Add a 120 ohm resistor and change the 4 iC 74HC125D by 74HCT125M? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
3G0 920 791 A: Questions (Black Screen repair) + Flashing | Tabaluga | 0 | 65 |
01-04-2024, 10:59 AM Last Post: Tabaluga |
|
CARPROG 13.77 FREE + REWORK | fantomel | 53 | 33,149 |
21-03-2024, 18:09 PM Last Post: dani3lxxl |
|
CarProg V10.05 Lib 020117CAR0000021 | mpautoservis | 20 | 18,259 |
09-08-2022, 11:45 AM Last Post: km666 |
|
Carprog need activation | junnnior | 78 | 25,928 |
22-01-2022, 19:28 PM Last Post: canisha |
|
W211 mileage correction with carprog clone. Version 10.93 | RUBBER_UNDIES | 8 | 4,073 |
05-02-2019, 16:17 PM Last Post: kryspl |
|
w211 assyst carprog | mitsakos5800 | 0 | 1,070 |
22-01-2019, 21:02 PM Last Post: mitsakos5800 |
|
24C64 - CarProg | DaBotta | 6 | 2,919 |
28-09-2018, 22:07 PM Last Post: DaBotta |
|
MB Service Diag V0.2 in Carprog | darkmal | 0 | 1,207 |
13-08-2018, 19:37 PM Last Post: darkmal |
|
Carprog d1 with a9 test fails any ideas for fix ? | dil6222 | 7 | 6,208 |
18-06-2018, 19:22 PM Last Post: dil6222 |
|
Carprog A9 test problem. | witux | 4 | 2,580 |
10-03-2018, 18:58 PM Last Post: rs@chip |
Users browsing this thread:
28 Guest(s)
28 Guest(s)
Return to TopReturn to Content