Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Volvo V50 2006 edc16C31 problem
23-01-2016, 11:43 AM,
Post: #11
|
|||
|
|||
RE: Volvo V50 2006 edc16C31 problem
|
|||
23-01-2016, 14:06 PM,
Post: #12
|
|||
|
|||
RE: Volvo V50 2006 edc16C31 problem
It is a standard Bosch BDM pinout.
This pinout is for FGtech unit, true EVC BDM100 also uses the same BDM plug, but clone BDM100 is really CMD/BDM555 from Dimsport, so the device pins are wrong. You can check the two ground pin on the board, the unmarked pad next to it is also ground, so when you find those two ground pads, you know which way, but Bosch will have the connections like in the picture. |
|||
Reputation: +1 - DjRomeo [+1] | |||
25-01-2016, 08:21 AM,
Post: #13
|
|||
|
|||
RE: Volvo V50 2006 edc16C31 problem
Thank you all working perfect but now i have another fault
Now i try to write original file again in ecu and to start the car but car wont start says immo error. What tool can synch Edc16c31 with CEM? |