[DjRomeo]

Hello,

i have problem with volvo V50 2006 year edc16C31 wanna turn off dpf . I try read with galleto V54,mpps and other tools i think read good but very fast 1sec :/ and file readed, but problem is i turn off dpf and try write in file again ,but can't all tools say what can't i try search bdm or somethink but can't find any info .
Maybe some one can give me edc6C31 pin out were is K/+/- pin's maybe i do somethink wrong.

Thank you all for help.

[enigmacar]

BDM best solution

[DjRomeo]

Could you show me bdm soldering manual with galeto,bdm100 or other tool ? thank you.

[mike_service]

This kind of ecu can be read by K-line on the bench !are easy job !
The problem are for dpf off file,if not are correct will go in limp mode in next 5 km

[DjRomeo]

This kind of ecu can be read by K-line on the bench !are easy job !
The problem are for dpf off file,if not are correct will go in limp mode in next 5 km

I try all tools ,but can't normal read and write file ,when i try on bench write all tools say:
WRITING ECU
Writing Initialization...File not recognized, send file to technical support.

I asking for help how need connect by K-line ore bdm pinout's with what tools :/

[PhilipM]

Have you seen the pinout picture for VOLVO EDC16C31 in FGTech\DOCUMENTS\PIN_OUT_ECUS\ ?

[DjRomeo]

Have you seen the pinout picture for VOLVO EDC16C31 in FGTech\DOCUMENTS\PIN_OUT_ECUS\ ?

yes i look , i try with fgtech with europe version ,with chine clone , mpps, galleto1260 ..... and all can only - READ I CANT'T >>>WRITE<<<< .

[mike_service]

Hi
IO Terminal can read/write such ecu,FGTech can do it,CMD can do it...and many other tools !

[DjRomeo]

Yes all people say same all tools can do it....... but i try 3-4 tools and all same can only read , maybe ecu are locked ore somethink ? why imposible in this ecu write anythink :/

[PhilipM]

I think I had problems with one of these too, so I just opened it and used BDM before I pulled my hair out!