Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ ICOM A2 Fan Failure
18-02-2016, 02:10 AM,
Post: #1
|
|||
|
|||
ICOM A2 Fan Failure
My ICOM A2 clone system led is blinking red after bootup. Self test showing fan failure. Yeah I know no fan in these. Tested 4 or so cars yesterday without an issue, plugged in this am and saw it went for green to red. Re-loaded firmware and still same. Seems to id cars ok and pull codes but I'm not going to program anything. Any ideas???
|
|||
18-02-2016, 05:19 AM,
Post: #2
|
|||
|
|||
RE: ICOM A2 Fan Failure
What firmware did you flash? Newest?
|
|||
18-02-2016, 06:13 AM,
Post: #3
|
|||
|
|||
RE: ICOM A2 Fan Failure
|
|||
18-02-2016, 09:53 AM,
Post: #4
|
|||
|
|||
RE: ICOM A2 Fan Failure
Hi
i have the same problem. my a2 icom led is shinig red and i have 2 mistake when i run the self test. Wlan and Fan, but the icom is working with the cars. Regards |
|||
18-02-2016, 20:38 PM,
Post: #5
|
|||
|
|||
RE: ICOM A2 Fan Failure
Pulled it apart last night and re-seated connections after blasting them with some contact cleaner. Cleaned and applied some new thermo grease on heat sink and today no more blinking red and no self test failures. Scanned 3 cars already today without an issue. Fingers crossed.
|
|||
08-06-2016, 20:48 PM,
Post: #6
|
|||
|
|||
RE: ICOM A2 Fan Failure
Still no error?
As I have the same issue ;-( Don't forget to press and , if my post helped you.
|
|||
13-06-2016, 03:05 AM,
Post: #7
|
|||
|
|||
ICOM A2 Fan Failure
Still working, used daily, approx 40 scans a week
Sent from my iPhone using Tapatalk |
|||
17-06-2016, 07:01 AM,
Post: #8
|
|||
|
|||
RE: ICOM A2 Fan Failure
I have this red light from day 1 and still working as it should...
|
|||
18-06-2016, 05:59 AM,
Post: #9
|
|||
|
|||
RE: ICOM A2 Fan Failure
Hi..
I have same symtoms. IcomA2 system led is red... How was it solve? Please help me!!! |
|||
18-06-2016, 16:15 PM,
Post: #10
|
|||
|
|||
ICOM A2 Fan Failure
(18-06-2016, 05:59 AM)smlee747 Wrote: Hi.. First thing I did was reload current firmware, which didn't help but it did take that out of the equation. Pulled it apart and re-seated connections after blasting them with some contact cleaner. Cleaned and applied some new thermo grease on heat sink and chip - no more blinking red and no self test failures. That's what worked for me |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content