Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mini R56, ASC Coding Problem, Pls Help!
13-09-2017, 17:02 PM,
Post: #11
|
|||
|
|||
RE: Mini R56, ASC Coding Problem, Pls Help!
Seems we need an ICOM to get DSC coded :/
|
|||
13-09-2017, 17:27 PM,
Post: #12
|
|||
|
|||
RE: Mini R56, ASC Coding Problem, Pls Help!
I code it my dsc in my mini r56 s 2008.
k+dcan camble does not read this module in NCS expert . I have k+dcan camble and reads all other modules expect this one. So, i bought a chinese icom and connect it with NCS EXPERT and ISTA. Then i backup my settings from my orizinal dsc. After install a used one dsc from a CLUBMAN wich had the same part number with mine. I open INPA via icom, and found that he had the vin number from the donor car. I change the vin number using winkfp via icom . Then i code it with via NCS expert connect it via icom. When i code it, i open in second window the settings, witch i had backup, and i did exactly the same coding. I finished all these and when i start the engine appeared a message said "dsc error". I read the error with ISTA and found that the used dsc needs callibration. I went to a mechanic wich had DIS and he calibrate it and ready. No error , not anything |
|||
13-09-2017, 19:31 PM,
Post: #13
|
|||
|
|||
RE: Mini R56, ASC Coding Problem, Pls Help!
2011 model, ista says dsc does not need calibration after certain version of software, tried to flash old version of software back with winkfp but I am struggling, is there a specific way to flash backward?
|
|||
04-10-2017, 11:47 AM,
Post: #14
|
|||
|
|||
RE: Mini R56, ASC Coding Problem, Pls Help!
K+dcan
Will not work.. You need Good icom device Indonesia..........
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
FDL coding BMW Apps | Mugga | 3 | 132 |
11 hours ago Last Post: Mugga |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,381 |
Yesterday, 08:06 AM Last Post: smilo |
|
Coding a F80 M3 race car | PeterY | 10 | 481 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 602 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 238 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 219 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 118 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,716 |
22-04-2024, 11:44 AM Last Post: kwat |
|
F20 LCI2 black panel cluster coding | sqorpius | 9 | 2,010 |
21-04-2024, 12:38 PM Last Post: Adekborys69 |
|
G01 2019 X3 - ATM Replacement/Coding Help Needed | jchisholm17 | 10 | 462 |
18-04-2024, 21:44 PM Last Post: jchisholm17 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content