Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digiprog3 ST27 Focus '98-'02 ERROR
17-07-2016, 21:48 PM,
Post: #1
|
|||
|
|||
Digiprog3 ST27 Focus '98-'02 ERROR
I've got a Digiprog3 V04/94M
I tryed many times correction a Focus Visteon dash 98 to 2002 with Motorola MCU. I think this is HC11E9 Mask: E28B Every time I've got "ERROR" meassage. Same than with no connection. I'm using plug27 +one wire soldering to TP3 or TP46. The wires and connectors is correct! Try to: -MCU 1 and 2 pin to bridge -Modified dash connectors like Enigma (dash connector pin 1 and 2 to ground. Digiprog ST27 use only pin 1 to ground) No solution |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Digiprog3 ST27 Focus '98-'02 ERROR - by Szokimoki - 17-07-2016, 21:48 PM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by Clusters - 17-07-2016, 22:24 PM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by Szokimoki - 18-07-2016, 04:18 AM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by Hazzard - 30-10-2016, 18:11 PM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by kizagt - 28-12-2016, 19:50 PM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by fuego69 - 01-01-2017, 10:50 AM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by ombra - 01-01-2017, 11:35 AM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by fuego69 - 01-01-2017, 21:48 PM
RE: Digiprog3 ST27 Focus '98-'02 ERROR - by ombra - 01-01-2017, 22:10 PM
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content