Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[Solved] Need Help NBT unit flash fail
13-10-2016, 23:57 PM,
(This post was last modified: 22-02-2018, 03:59 AM by jaramillo.)
Post: #1
|
|||
|
|||
[Solved] Need Help NBT unit flash fail
edited problem solved
|
|||
14-10-2016, 00:31 AM,
Post: #2
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
Unkoun is brick during programming, but maybe reflash can restored this.
needs enet or icom with dhcp Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
14-10-2016, 00:47 AM,
Post: #3
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
You can sometimes solve missing or corrupt CAFD (FFFF_255_255_255) through injection process:
- Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired HU_NBT => Click on "Detect CAF for SWE" => Select the CAFD from I-Level shown => Select OK => Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => Select CODE. It sort of depends on what the issue is whether it will work. |
|||
14-10-2016, 00:53 AM,
Post: #4
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
@Almaretto @ruben_17non
Should I use the Flashing guide for Esys? or the procedure is different? |
|||
14-10-2016, 00:56 AM,
Post: #5
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
Try first restore Cafd follow post of @Almaretto
is more easy than flash. maybe also need exit of programming.transport mode of NBT, Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
14-10-2016, 01:08 AM,
(This post was last modified: 14-10-2016, 01:20 AM by jaramillo.)
Post: #6
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
(14-10-2016, 00:56 AM)ruben_17non Wrote: Try first restore Cafd follow post of @Almaretto There is a guide to do that? Thanks for your response! (14-10-2016, 00:47 AM)Almaretto Wrote: You can sometimes solve missing or corrupt CAFD (FFFF_255_255_255) through injection process:I made the process without success. |
|||
14-10-2016, 02:45 AM,
Post: #7
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
If I have the backup of the SVT and CAFD's wirh this information I could restore the state of the HU-H?
|
|||
14-10-2016, 04:04 AM,
Post: #8
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
(14-10-2016, 02:45 AM)jaramillo Wrote: If I have the backup of the SVT and CAFD's wirh this information I could restore the state of the HU-H? If it is the same version as your current state you could try using backup. You could also try saving and editing SVT in notepad or in SVT-editor to correct name of CAFD first. |
|||
Reputation: +1 - jaramillo [+1] | |||
14-10-2016, 15:51 PM,
Post: #9
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
If someone can help me I could share the SVT_ist, SVT_soll and SVT_tal that i did calculated. I have saw some extrage things in those files.
I could also share the actual FA and backuo files (FA, SVT & CAFD's) I just want rescue my NBT unit. Someone could guide me to play with those files? to make the process by my way Thanks in advance |
|||
14-10-2016, 21:54 PM,
Post: #10
|
|||
|
|||
RE: [Unsolved] Need Help NBT unit flash fail
(14-10-2016, 15:51 PM)jaramillo Wrote: If someone can help me I could share the SVT_ist, SVT_soll and SVT_tal that i did calculated. I have saw some extrage things in those files.Hi friend I assist some dealers here in brazil and it is possible to restore your hu, i did it a lot of times with enet cable, with icom always failed Are you able to run tal like this ? In case you need i can do it for you remotely using teamviewer |
|||
Reputation: +1 - jaramillo [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content