Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to
[email protected]
Solved ✔ F30 FEM issue after ISTA+ programming
15-11-2016, 19:05 PM,
|
|
shintake
Member
|
Posts: 26 Threads: 2
Threads: 2
Thanks Received: 6 in 5 posts
Thanks Given: 123
Joined: Jun 2014
Reputation:
1
|
|
RE: F30 FEM issue after ISTA+ programming
(15-11-2016, 18:58 PM)lynxbmw Wrote: Tried to flash fem gw, but it ended with exception
Code: Read SVT before TAL execution started.
TAL execution started.
ExecutionID=2016/11/15-20:54:21.936
[FEM_GW - 10] - [Exception - FEM_GW - 10] SVK-Ist does not match expected SGBMIDs for ecu ECUId:FEM_GW_0x10. Excpected (relevant process classes only): [hwap_00000f3d-255_255_255, hwap_00000f3b-255_255_255, hwel_00000792-000_005_002, hwap_00000f38-255_255_255, hwap_00000f3a-255_255_255], Actual (relevant process classes only): [hwel_00000792-000_004_003, hwap_00000f3a-255_255_255, hwap_00000f38-255_255_255, hwap_00000f3d-255_255_255, hwap_00000f3b-255_255_255], Missing SGBMID(s): [hwel_00000792-000_005_002], Surplus SGBMID(s): [hwel_00000792-000_004_003]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "55s". [C206]
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
I've entered i-level plant F020-12-07-500 and latest F020-16-11-502 which is selected I suppose based on my psdzdata.
wrong I level shipment you need the one that macth HW id
|
|
The following 4 users say Thank You to shintake for this post:4 users say Thank You to shintake for this post
• brunofraga, brunofraga, lynxbmw, lynxbmw
|
16-11-2016, 00:00 AM,
|
|
lynxbmw
Bavarian
|
Posts: 444 Threads: 106
Threads: 106
Thanks Received: 3,740 in 259 posts
Thanks Given: 160
Joined: May 2015
Reputation:
1,801
|
|
RE: F30 FEM issue after ISTA+ programming
Problem solved.
FEM GW was flashed by hand by @shintake, then I ran diagnostic and there were lot of errors almost everything was not working, but there was KL15.
I corrected the plant i-level and flashed FEM with ISTAP, then all problems were solved.
|
|
The following 4 users say Thank You to lynxbmw for this post:4 users say Thank You to lynxbmw for this post
• brunofraga, brunofraga, Czozen, Czozen
|
Possibly Related Threads… |
Thread |
Author |
Replies |
Views |
Last Post |
|
ISTA+ Licenserequest 4.45.30 |
B O S S |
45 |
1,402 |
52 minutes ago
Last Post: 2013m5
|
|
ista 4.46 Standalone |
kiranabc |
86 |
10,803 |
7 hours ago
Last Post: kiranabc
|
|
ISTA Standalone Licenserequest up to v4.37.4x |
Sedoy |
8,711 |
669,507 |
Yesterday, 14:11 PM
Last Post: Sedoy
|
|
ISTA 4.46.xx problems and possible solution |
Sedoy |
98 |
11,766 |
Yesterday, 09:48 AM
Last Post: egyclick
|
|
ISTA 4.47 test plan not available on M3 |
bmwm3power |
3 |
135 |
26-04-2024, 20:15 PM
Last Post: 2013m5
|
|
ISTA+ 4.47.1x Install Files - MEGA |
shawnsheridan |
12 |
1,556 |
26-04-2024, 15:36 PM
Last Post: shawnsheridan
|
|
ISTA 4.47.1x I-LEVEL+OVERVIEW |
AutoExe3219 |
0 |
262 |
24-04-2024, 22:52 PM
Last Post: AutoExe3219
|
|
Kafas issue aftrer ACC Retrofit |
It3_Magic |
14 |
606 |
23-04-2024, 07:44 AM
Last Post: It3_Magic
|
|
[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed |
hashtagmaster |
61 |
18,427 |
21-04-2024, 22:17 PM
Last Post: grizzle
|
|
ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 |
maksymw |
3 |
990 |
21-04-2024, 12:02 PM
Last Post: matigdy
|
Users browsing this thread:
3 Guest(s)
Return to TopReturn to Content