[rs@chip]

I use this for two yers now, i even programed with this.

2007-2016, for older have an adapter to switch k-line. best quality.

No china, 100 % made in DE

https://www.obdexpert.de/prestashop/home...3html.html

VERY very risky to flash CANBUS cars with the K+DCAN of any quality. The data speed is much higher and the cable has no buffer memory for flashing.

I also have flashed with a very good K+DCAN (owned over 6 years, has worked with everything), ...until I bricked a 2008 M5 SMG module. Then I tried to ISTA/P it, and it made it even worse, "Programming status 12".
Some CANBUS modules will flash fine, but when you brick a module, then you learn not to use a $30 cable. I managed to unbrick the module only with ICOM or Omitec cable, which both have built in memory to help out with the speed.

Very good for diagnosing and coding, but you are risking very much trying to flash 2007+ BMWs with K+DCAN.

This is all true mate..I also remember how I bricked cas4 on f serie..steel have nightmers.. but for diagnose, simple module coding and adaptation is k-dcan ok..for other yobs I use abrites and pasoft..