[number7]

I have installed RNS 510 + camera module + rear camera(4pins).
I have made wires by my own - only connectors are original.
Problem is: when I put reverse gear - image shows on 5 secound then disapear and shows message "camera not available". After eresing errors from 6C image shows on 5 sec.

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
18-Aux. Heat -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: Malfunction 0010
56-Radio -- Status: Malfunction 0010
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: Malfunction 0010



-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 7E0 920 860 J HW: 7E0 920 860 J
Component: KOMBI H04 0709
Serial number: 00000000000000
Coding: 160201
Shop #: WSC 02756 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_SE36.rod
VCID: 2F88F0337E12D46A6CE45E-807A

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 680 H HW: 1T0 035 680 A
Component: RNS-MID H70 4120
Revision: AB001001 Serial number: VWZ6Z7H5061043
Coding: 08010400040000900014
Shop #: WSC 01357 011 00200
VCID: 3380FC43923AF88A083C62-8066

Subsystem 1 - Part No: 1T0 919 859 B
Component: EU West V12 8195

1 Fault Found:
00856 - Radio Antenna
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 5
Fault Frequency: 5
Reset counter: 233
Mileage: 34920 km
Time Indication: 0

-------------------------------------------------------------------------------
Address 6C: Back-up Cam. Labels: 5N0-907-441.clb
Part No SW: 7E0 907 441 HW: 7E0 907 441
Component: J772__Rearview 0040
Revision: 00H08000 Serial number: 525PA8-J080091
Coding: 0010015
Shop #: WSC 43177 000 104857
VCID: 6524521B6C6E963A56C80C-8030

3 Faults Found:
03006 - Back-up Camera System not calibrated
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 233
Time Indication: 0

01317 - Control Module in Instrument Cluster (J285)
013 - Check DTC Memory
Freeze Frame:
Fault Status: 01101101
Fault Priority: 6
Fault Frequency: 1
Reset counter: 233
Mileage: 34927 km
Time Indication: 0
Date: 2015.07.16
Time: 09:34:19

Freeze Frame:
Term 15 On
Reverse OFF
Count: 3

02283 - Video Connection to Output [End Unit]
011 - Open Circuit
Freeze Frame:
Fault Status: 01101011
Fault Priority: 3
Fault Frequency: 1
Reset counter: 233
Mileage: 34927 km
Time Indication: 0
Date: 2015.07.16
Time: 09:34:59

Freeze Frame:
Term 15 On
Reverse ON
Count: 4