Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Carprog firmware update with jlink
29-12-2017, 22:35 PM,
Post: #21
|
|||
|
|||
RE: Carprog firmware update with jlink
Hello guys! how can programing another MCU atmel if i broken leg number 60 .its any chance to do something ? thancks in advance!
|
|||
30-12-2017, 00:47 AM,
Post: #22
|
|||
|
|||
RE: Carprog firmware update with jlink
(29-12-2017, 22:35 PM)gryglk Wrote: Hello guys! how can programing another MCU atmel if i broken leg number 60 .its any chance to do something ? thancks in advance! dremel top of mcu near broken leg very carefully, exposing the inner leg part, then solder a wire from there to leg pad if my post helps please give Reputation and Thanks
|
|||
30-12-2017, 07:22 AM,
Post: #23
|
|||
|
|||
RE: Carprog firmware update with jlink
Hello
I am putting 12 v adapter in carprog even sa me problem Jlink cannot connect to cpu core I guess i will order another one Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
30-12-2017, 12:47 PM,
(This post was last modified: 30-12-2017, 12:51 PM by mikroel.)
Post: #24
|
|||
|
|||
RE: Carprog firmware update with jlink
(30-12-2017, 07:22 AM)raffy haddad Wrote: Hello not need to connect 12V power adapter ,lift 55 PIN ,connect pin55 to proper pin on the PCB (Vcc (3.3V) ) and connect USB to PC. Wait 5 min and ...DONE ,MCU will be ERASED . ONLY erased MCU can be recognized by J-Link . (29-12-2017, 22:35 PM)gryglk Wrote: Hello guys! how can programing another MCU atmel if i broken leg number 60 .its any chance to do something ? thancks in advance!How did you manage to break pin 60 ??? Proper MCU is very hard to find in this moment ,it is too old ver. |
|||
30-12-2017, 14:22 PM,
Post: #25
|
|||
|
|||
RE: Carprog firmware update with jlink
|
|||
30-12-2017, 15:10 PM,
(This post was last modified: 30-12-2017, 15:21 PM by gryglk.)
Post: #26
|
|||
|
|||
RE: Carprog firmware update with jlink
(30-12-2017, 12:47 PM)mikroel Wrote:i was careless and tangled(30-12-2017, 07:22 AM)raffy haddad Wrote: Hello what do you think,what sells on AliExpress is it worth buying? (30-12-2017, 15:10 PM)gryglk Wrote:(30-12-2017, 12:47 PM)mikroel Wrote:i was careless and tangled(30-12-2017, 07:22 AM)raffy haddad Wrote: Hello |
|||
30-12-2017, 15:53 PM,
Post: #27
|
|||
|
|||
RE: Carprog firmware update with jlink
(30-12-2017, 15:10 PM)gryglk Wrote:I have 2 pieces, I bought a number to home if it would be needed.(30-12-2017, 12:47 PM)mikroel Wrote:i was careless and tangled(30-12-2017, 07:22 AM)raffy haddad Wrote: Hello I can sell one if you can not find one, send pm in that way. Available in Sweden IF YOU ARE SENDING ME PM AND ASKING FOR PASSWORD WITHOUT TELLING ME WHERE THE LINK IS HERE, I WILL DELETE THE PM !!
|
|||
30-12-2017, 16:32 PM,
Post: #28
|
|||
|
|||
Carprog firmware update with jlink
Yeah i have few also for my needed.....
Sent from my iPhone using Tapatalk |
|||
30-12-2017, 17:47 PM,
Post: #29
|
|||
|
|||
RE: Carprog firmware update with jlink
|
|||
30-12-2017, 18:11 PM,
Post: #30
|
|||
|
|||
RE: Carprog firmware update with jlink
(30-12-2017, 17:47 PM)23Andi23 Wrote:Yes, I use one of them in all my Carprog and they work well.(30-12-2017, 15:53 PM)keyzex Wrote: I have 2 pieces, I bought a number to home if it would be needed. I bought five to have reserves at home. IF YOU ARE SENDING ME PM AND ASKING FOR PASSWORD WITHOUT TELLING ME WHERE THE LINK IS HERE, I WILL DELETE THE PM !!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content