Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
M Performance Brake Problem
12-02-2017, 13:32 PM,
Post: #21
|
|||
|
|||
RE: M Performance Brake Problem
(12-02-2017, 06:57 AM)Mcrae Wrote: Did you really have the FA SPBR when you make an readout now? I just added SPBR and it is working! No need to code the dsc module. Hi Mcrae, Yes I have the SPBR into the FA now when I read it from the car. Look into the atached image. The brake feels spongy, and the travel is long compared with the stock brakes. Thanks in advance! |
|||
12-02-2017, 13:57 PM,
Post: #22
|
|||
|
|||
RE: M Performance Brake Problem
(12-02-2017, 13:32 PM)jaramillo Wrote:(12-02-2017, 06:57 AM)Mcrae Wrote: Did you really have the FA SPBR when you make an readout now? I just added SPBR and it is working! No need to code the dsc module. Coding wont change how they feel, just how DSC operates when activated Have you bled them properly ? Maybe bleed the whole DSC system with the full ISTA procedure. There is also a reason the factory fitted M Sport brakes get a different master cylinder. These will not feel the same without it. |
|||
Reputation: +1 - jaramillo [+1] | |||
12-02-2017, 19:06 PM,
Post: #23
|
|||
|
|||
RE: M Performance Brake Problem
Feeling of the Brakes is well different with that! You need less force to get the same result as without!
But you are right, normally there should be also any changes in the DSC! @Jaramillo Could it be there is some air in the System? Pump the Brakes, release, wait a few seconds and hit the Brake one more, if the way of travel is now much more than befor, you have air in the system! |
|||
13-02-2017, 14:16 PM,
Post: #24
|
|||
|
|||
RE: M Performance Brake Problem
Assume that brake bleeding doing well, there are some noticeable feel after added SPBR and VO code to DSC ecu.
Upper half of brake travel won’t change, but the bottom half travel you will find brake pedal harder in feel with increased brake force. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,351 |
6 hours ago Last Post: smilo |
|
bmw e70 parking brake actuator pinout diagram | psilocin | 1 | 41 |
24-04-2024, 06:59 AM Last Post: Node |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 216 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,706 |
22-04-2024, 11:44 AM Last Post: kwat |
|
Brake Pads Warning Disable -Racing purpose | marcdts | 2 | 140 |
19-04-2024, 19:59 PM Last Post: bmchicago |
|
BMW E60 coding problem | GarageX | 8 | 355 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
E60 DSC unit, Cruise+brake vs ACC2 stop and go | GoNz0- | 4 | 189 |
29-03-2024, 09:11 AM Last Post: GoNz0- |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 156 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 261 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Dme Cas synchronization Problem | donjuan020 | 3 | 269 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content