Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM NEXT KL Problem
18-01-2017, 15:53 PM,
Post: #1
|
|||
|
|||
ICOM NEXT KL Problem
Hello friends,
I have a new genuine ICOM NEXT. I can connect to it easily from my laptop and have updated to latest firmware. However, ISTA/D and ISTA/P do not see KL30 or KL15. When I connect my ICOM A1 clone it does connect and see KL This is without changing anything on laptop. What setting could I have wrong on the NEXT VCI? |
|||
18-01-2017, 16:24 PM,
Post: #2
|
|||
|
|||
RE: ICOM NEXT KL Problem
I dont know how about you but i noticed that not showing on that cars which need 20pin adapter th eolder ones
|
|||
18-01-2017, 17:05 PM,
(This post was last modified: 18-01-2017, 18:12 PM by bmwcare.)
Post: #3
|
|||
|
|||
RE: ICOM NEXT KL Problem
(18-01-2017, 16:24 PM)Silva1337 Wrote: I dont know how about you but i noticed that not showing on that cars which need 20pin adapter th eolder ones I tried it on 2007_03 E92 Are you saying that it only works with newer models like Fxx? It was supposed to be backwards compatible. Is your NEXT-A genuine BMW? UPDATE: I just checked VIN and build date is 2007.03.27 so it's fully DCAN. I either have a faulty genuine BMW ICOM or I've an incorrect setting on the Actia interface. I will try again tomorrow and take proper screenshots of the issue. |
|||
19-01-2017, 03:30 AM,
(This post was last modified: 19-01-2017, 03:32 AM by CATAHA.)
Post: #4
|
|||
|
|||
RE: ICOM NEXT KL Problem
(18-01-2017, 17:05 PM)bmwcare Wrote:on this forum this issue came up couple of times.....(18-01-2017, 16:24 PM)Silva1337 Wrote: I dont know how about you but i noticed that not showing on that cars which need 20pin adapter th eolder ones The answer was FAKE Icom used one number of IP_ADDRESS and original uses ANOTHER IP_ADDRESS If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
19-01-2017, 05:57 AM,
Post: #5
|
|||
|
|||
RE: ICOM NEXT KL Problem
|
|||
19-01-2017, 10:47 AM,
Post: #6
|
|||
|
|||
RE: ICOM NEXT KL Problem
Are you using direct connection (with ip) or thru ediabas?
what is the IP of ICOM? clones have same IP, originals have different IP |
|||
19-01-2017, 12:18 PM,
Post: #7
|
|||
|
|||
RE: ICOM NEXT KL Problem
|
|||
19-01-2017, 17:36 PM,
Post: #8
|
|||
|
|||
RE: ICOM NEXT KL Problem
Are you running standalone ista or licensed?
|
|||
19-01-2017, 19:31 PM,
Post: #9
|
|||
|
|||
RE: ICOM NEXT KL Problem
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,351 |
6 hours ago Last Post: smilo |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,706 |
22-04-2024, 11:44 AM Last Post: kwat |
|
[MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS | hashtagmaster | 105 | 36,067 |
17-04-2024, 18:36 PM Last Post: hashtagmaster |
|
ICOM Firmware (NEXT & A2) always current! | Vojno | 206 | 43,300 |
12-04-2024, 23:36 PM Last Post: bennymx |
|
Poor wifi signal from new ICOM's | bmchicago | 3 | 325 |
12-04-2024, 18:55 PM Last Post: Node |
|
BMW E60 coding problem | GarageX | 8 | 355 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,491 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 368 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 156 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 261 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content