Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
K+DCAN and Ediabas help please
23-01-2017, 17:23 PM,
Post: #11
|
|||
|
|||
RE: K+DCAN and Ediabas help please
At me never mind its com 1 or com 9 if I set it in OBD.ini too its working
But Glad that you fixed your issue Good luck |
|||
23-01-2017, 18:10 PM,
Post: #12
|
|||
|
|||
RE: K+DCAN and Ediabas help please
Hello look I found this if it can help. How to setup BMW ICOM Rheingold on ENET cable for F-series ...
|
|||
27-01-2017, 04:05 AM,
Post: #13
|
|||
|
|||
RE: K+DCAN and Ediabas help please
(23-01-2017, 18:10 PM)tortu25 Wrote: Hello look I found this if it can help. How to setup BMW ICOM Rheingold on ENET cable for F-series ...1.Run EasyConnect Utility 2.Type choice "ENET" 3.IP choice "Autodetect Header" then click "ICOM Lock" 4.Run ISTA-D and check VCI config 5.Interface type choice"Dealer organisation ICOM/ENET local area and ISIS netw" Press and, If this post helped you.
|
|||
27-01-2017, 07:40 AM,
(This post was last modified: 27-01-2017, 07:47 AM by Twoone.)
Post: #14
|
|||
|
|||
RE: K+DCAN and Ediabas help please
(27-01-2017, 04:05 AM)AutoExe3219 Wrote:(23-01-2017, 18:10 PM)tortu25 Wrote: Hello look I found this if it can help. How to setup BMW ICOM Rheingold on ENET cable for F-series ...1.Run EasyConnect Utility Point 1,2 and 3 are only necessary is you make connection true EDIABAS. Interface choice in VCI settings should be EDIABAS. But if you do only point 4 and 5 you also wil be fine. For me this have always worked. If ENET is already connected true the car you see ENET in connection managar with correct VIN already shown. So i don't have ediabas installed. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content