Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Consult 3 with delphi vci 100251
26-01-2017, 03:08 AM,
Post: #1
|
|||
|
|||
Consult 3 with delphi vci 100251
Dear all,
I hope you are well, I've question regarding consult 3 . Can i use consult 3 with my delphi vci 100251 (cdp + pro)? Thanx |
|||
26-01-2017, 05:25 AM,
Post: #2
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
Forget it, nissan consult3 works with own adapter.
|
|||
27-01-2017, 00:36 AM,
(This post was last modified: 14-02-2017, 23:19 PM by Woogie.)
Post: #3
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
I use a renault allaince VI interface with nissan consult software
|
|||
27-01-2017, 15:21 PM,
Post: #4
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
|
|||
27-01-2017, 19:35 PM,
Post: #5
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
Hey
Cantiecar works with CS3+. Bit buggy, but works Cheers |
|||
28-01-2017, 03:49 AM,
Post: #6
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
What about vci 100251 (cdp + pro)
|
|||
28-01-2017, 12:45 PM,
Post: #7
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
|
|||
14-02-2017, 21:45 PM,
Post: #8
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
I know you have to edit an .ini file with whatever name your interface's name is in the registry.
But as far as I know, no interface will give you datastream, only codes. But if I'm wrong, please, by all means correct me. |
|||
14-02-2017, 22:03 PM,
Post: #9
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
I tested Nissan consult with actia vci work good...
|
|||
14-02-2017, 23:23 PM,
(This post was last modified: 14-02-2017, 23:24 PM by Woogie.)
Post: #10
|
|||
|
|||
RE: Consult 3 with delphi vci 100251
If your tool has the serial RLT02 or RLT2002 then it won't work with Nissan Consult III software. Consult software will only work under XP install
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content