Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA 4.04.12 Voltage Control tool
28-02-2017, 23:14 PM, (This post was last modified: 02-06-2017, 11:47 AM by beemerboy88.)
Post: #1
XZBMW  ISTA 4.04.12 Voltage Control tool
ISTA 4.04.12 Voltage Control.

Simulates voltage of connected interface. ICOM, KDCAN etc.

password: beemerboy88

Install Instructions:

Unblock archive and extract ALL files to \testergui\bin\release.
Put voltage tool on desktop (or any location).

How to use:

Start ISTA (if any problems try running as admin).
Run voltage control tool.
Start session.

Notes:

FASTA/HW checks are disabled.
Default voltage on startup is 14V.
Shutdown the control tool to restore real time voltage monitoring.
Change screen position of voltage tool by dragging it using top left corner.


Attached Files
ISTA 4.04.12 Voltage Control.txt
File Type: .txt
Downloaded: 178 times
Size: 70 bytes

Reputation: +28 - smlee747 [+1] , ruben_17non [+1] , volavka [+2] , Loliceman [+1] , fabulous [+1] , jerry_han77 [+1] , RocketSurgeon [+1] , simonchs [+1] , E60 [+1] , TomoR [+1] , Marcos [+1] , Dirchik [+1] , Joe2 [+1] , kestum [+1] , tururu33 [+1] , Twoone [+1] , kregiel [+1] , okolo [+1] , egyclick [+1] , rabihfiras [+1] , Kenny [+1] , hsuchiawen [+1] , georgia55 [+1] , t1tan1 [+1] , fumantwo [+1] , Sour [+1] , LUCAS45 [+1]
Quote this message in a reply
[+] 111 users say Thank You to beemerboy88 for this post
02-03-2017, 20:03 PM, (This post was last modified: 02-03-2017, 20:10 PM by egyclick.)
Post: #2
RE: ISTA 4.04.12 Voltage Control tool
Hello beemerboy88, since you are very skilled and know these programs inside out, I'm asking whether is possible to make the detection in ISTAD more simple.

For example the Inpa KDCAN cable is able to show in Inpa the real status of Ignition On or Off.
So is it possible to show up in ISTAD as 14v when Ignition is turned on and 0V when Ignition is turned off?
I noticed you made it to read the real voltage values from ICOM when the ISTA4 Voltage Control.exe is closed, instead if you make it read the registry value from:

"HKEY_LOCAL_MACHINE\SOFTWARE\BMWGroup\ISPI\Rheingold\TesterGUI.xVM_VCI_DefaultInterfaceType"

it should allow real voltage reading if value="ivm" meaning ISTAD is using ICOM
and it should show 14V or 0V if value="ediabas" meaning ISTAD is using Inpa KDCAN cable and ignition is either On or Off

not sure if I explained the suggestion correctly and if it's possible to accomplish, I would try to do it myself but I don't know where to start

cheers!
Quote this message in a reply
02-03-2017, 22:03 PM,
Post: #3
RE: ISTA 4.04.12 Voltage Control tool
(02-03-2017, 20:03 PM)egyclick Wrote:  Hello beemerboy88, since you are very skilled and know these programs inside out, I'm asking whether is possible to make the detection in ISTAD more simple.

For example the Inpa KDCAN cable is able to show in Inpa the real status of Ignition On or Off.
So is it possible to show up in ISTAD as 14v when Ignition is turned on and 0V when Ignition is turned off?
I noticed you made it to read the real voltage values from ICOM when the ISTA4 Voltage Control.exe is closed, instead if you make it read the registry value from:

"HKEY_LOCAL_MACHINE\SOFTWARE\BMWGroup\ISPI\Rheingold\TesterGUI.xVM_VCI_DefaultInterfaceType"

it should allow real voltage reading if value="ivm" meaning ISTAD is using ICOM
and it should show 14V or 0V if value="ediabas" meaning ISTAD is using Inpa KDCAN cable and ignition is either On or Off

not sure if I explained the suggestion correctly and if it's possible to accomplish, I would try to do it myself but I don't know where to start

cheers!

Not planning to change anything for now. The KL15 on/off button simulates ignition so it's simple to use.
Quote this message in a reply
[+] 2 users say Thank You to beemerboy88 for this post
18-07-2017, 19:08 PM,
Post: #4
RE: ISTA 4.04.12 Voltage Control tool
Work the tool for the ISTA-D 4.6.22?

anyone tested this?

If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
18-07-2017, 19:55 PM,
Post: #5
RE: ISTA 4.04.12 Voltage Control tool
(18-07-2017, 19:08 PM)bmw335coding Wrote:  Work the tool for the ISTA-D 4.6.22?

anyone tested this?

This tool is version specific. New version made but not for public release. Try node's tool instead.
Quote this message in a reply
07-03-2018, 16:08 PM,
Post: #6
RE: ISTA 4.04.12 Voltage Control tool
Link failed. Can you repair? thanks
Quote this message in a reply
07-03-2018, 16:24 PM,
Post: #7
XZBMW  RE: ISTA 4.04.12 Voltage Control tool
ISTA 4.04.12 Voltage Control


Attached Files
ISTA 4.04.12 Voltage Control.txt
File Type: .txt
Downloaded: 64 times
Size: 102 bytes

Quote this message in a reply
[+] 2 users say Thank You to Bimmer540 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA+ 4.46.5x Install Files - MEGA shawnsheridan 4 412 1 hour ago
Last Post: shawnsheridan
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,685 649,608 1 hour ago
Last Post: Sedoy
XZBMW ISTA 4.46.5x I-LEVEL+OVERVIEW AutoExe3219 0 71 3 hours ago
Last Post: AutoExe3219
  ista 4.46 Standalone kiranabc 59 7,878 14-04-2024, 10:41 AM
Last Post: kiranabc
XZBMW ISTA+ 4.39 add/enable Expertmode ABL alex_cv 3 225 14-04-2024, 10:37 AM
Last Post: alex_cv
  ISTA File Missing? Homersbud 5 206 13-04-2024, 23:53 PM
Last Post: rocdeng
XZBMW ISTA/P 3.72.0.300 Install Files - MEGA shawnsheridan 33 4,253 13-04-2024, 16:41 PM
Last Post: BimmerLubuskie
XZBMW ISTA+ 4.46.4x Install Files - MEGA shawnsheridan 10 1,859 13-04-2024, 16:09 PM
Last Post: user_530d
XZBMW ISTA 4.46.4x I-LEVEL+OVERVIEW AutoExe3219 2 443 13-04-2024, 04:36 AM
Last Post: AutoExe3219
XZBMW BMW E84 Cruise control retrofit not workig Alyn546 4 154 12-04-2024, 14:23 PM
Last Post: DieStream

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content