Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Advise on flashing CCC
28-03-2017, 21:26 PM,
Post: #11
RE: Advise on flashing CCC
(26-03-2017, 12:16 PM)benoos Wrote:  In my opinion (and ISTA) GW should be the first one...
-CC6260 <-- Most/gateway
-CC3F60 <-- Audio
-CC4760 <-- tune
-CC6360 <-- Host
-CCA060 <--Application

I just did. It the same order 2 days ago with most 625, its no stress! Just be sure you have a good charger connected best 50 amp +
If you use winkfp just make sure you will give sone extra time by flashing cca060,
IT will show 100% after ca 10 minutes, but it will continue after that by writing your boot files and will take an extra 45minish just leave it connected until ok pops up.
Good luck
Quote this message in a reply
29-03-2017, 00:20 AM,
Post: #12
RE: Advise on flashing CCC
Thank you guys i got 70amp battery station
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Flashing F26 DME software into F22? Krysiaman 4 122 14-05-2024, 17:40 PM
Last Post: ruben_17non
  Flashing hybrid cars with E-sys ravager 0 183 18-04-2024, 09:51 AM
Last Post: ravager
  Flashing a stock box map to an E60 with XHP? GoNz0- 10 480 20-03-2024, 09:33 AM
Last Post: tomaxsas
XZBMW flashing modules hw-id redog4dy 5 386 04-03-2024, 13:26 PM
Last Post: redog4dy
  Power supply for coding flashing kklobo 14 1,050 29-02-2024, 08:37 AM
Last Post: nBlacky
XZBMW problem with flashing CHAMP2 module (the programming dependencies are not correct) azwgh 17 951 11-02-2024, 19:39 PM
Last Post: azwgh
  CAS 3 need repair after flashing stydly 10 574 02-02-2024, 15:43 PM
Last Post: 16eddi67
XZBMW f10 2011, flashing zgw redog4dy 2 232 18-01-2024, 10:19 AM
Last Post: redog4dy
XZBMW E-Sys flashing with "hwDeinstall" and "hwInstal" cm048 7 2,840 10-01-2024, 08:56 AM
Last Post: Node
XZBMW Request Psdzdata for flashing NBT EVO and EntryNav2 Latest version jojosqsq 2 324 30-12-2023, 10:49 AM
Last Post: Fx82

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content