Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Global.VehicleCommunication.CoApi.2086 - Signature check incorrect
12-04-2017, 16:59 PM,
Post: #11
|
|||
|
|||
RE: Global.VehicleCommunication.CoApi.2086 - Signature check incorrect
I used the ISTA to Code the module for the sunroof. It was initialized from the software after the default coding and everything is fine now
|
|||
22-03-2019, 23:40 PM,
Post: #12
|
|||
|
|||
RE: Global.VehicleCommunication.CoApi.2086 - Signature check incorrect
Hello. Please help! I have a US 2013 X1. It's an E84. Before I was a little more experienced with WinKFP, just a few days ago, I seemingly flashed my car with the wrong programming. I now have the same error that is the subject of this thread. When I attempt to start the car, it says I have a transmission error. The car refuses to start. Can anyone help me figure out which ZUSB I should be using to correct my programming? Any help is greatly appreciated.
I figured that I somehow blew the programming on my EGS. I went to Identification in INPA and the EGS fields are all blank. Under UIF, the ZB number is 7649172. I believe the ECU family is GKE233. (I only came to that conclusion because there are no other 764* parts in any of the other GK's.) The problem is the ZB is not listed in WinKFP. I don't know how that is. Does anyone have any idea how I can find the correct ZB? Update: Looks like I bricked my car by using a K+DCAN cable to program it. I am looking at low cost fixes. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content