Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Kess and ktag
23-04-2017, 08:00 AM,
Post: #1
|
|||
|
|||
Kess and ktag
I am looking for some advice on a kess v2 and ktag, i am looking to buy the interfaces for coding but need a realible version, i have just a few questions;
1. Is there a specific model i should go for i.e eu or china? 2. What pcb board with which chipset is best? 3. Are any of them upgradeable like original? |
|||
23-04-2017, 08:13 AM,
Post: #2
|
|||
|
|||
RE: Kess and ktag
Kess or ktag for coding?
I use kess to read and write ecu's but never for coding... 1. EU Clone 2. EU board 3. Never heard |
|||
23-04-2017, 09:21 AM,
(This post was last modified: 23-04-2017, 09:23 AM by domelec.)
Post: #3
|
|||
|
|||
RE: Kess and ktag
All clones are none updatable unless you get an old 3.099 fw kess and old 5.001 fw ktag then you can update them to 4.036 and 6.070 (info on here)
as for eu lolol can anyone prove these are actually made in the eu ??? and what exactly is eu made pmsl i think you will find the cheapest pcb manufacturers in the world are china therefore even legit companies buy their pcb's etc from china. from what iv seen too all sellers of these so called eu clones all stick warrenty stickers over the screws so you cant even open them to look at the pcb they are using (id say they are nothing more than a reworked china clone). bottom line is china clones reworked are exactly the same as an eu so called made pcb if my post helps please give Reputation and Thanks
|
|||
Reputation: +1 - autoport [+1] | |||
23-04-2017, 11:04 AM,
Post: #4
|
|||
|
|||
RE: Kess and ktag
I really only want it to read and write files, how do i go about reworking a china coone, if amyone has any good suppliers can they please pm me?
|
|||
23-04-2017, 11:30 AM,
Post: #5
|
|||
|
|||
RE: Kess and ktag
The man above is best guy for this
i help who i want! when i want to! otherwise dont ask free stuff
72656d617020726f73732068656c707320616c6c20746861742068656c7073206d65 genuine winols check click here |
|||
23-04-2017, 17:28 PM,
(This post was last modified: 23-04-2017, 19:41 PM by ROD-BENDERS.)
Post: #6
|
|||
|
|||
RE: Kess and ktag
(23-04-2017, 08:00 AM)Burt_100 Wrote: I am looking for some advice on a kess v2 and ktag, i am looking to buy the interfaces for coding but need a realible version, i have just a few questions; as faras I know CP2010 clones are like original tool and from time to time he offers updates, like on both my tools no tokens required. All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
23-04-2017, 19:26 PM,
(This post was last modified: 23-04-2017, 20:44 PM by autoport.)
Post: #7
|
|||
|
|||
RE: Kess and ktag
I wonder why they use for the "cinese clones" some wrong parts. with under 1 euro more they can use the right transistors.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content