Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Autocom cdp+ problem
22-05-2015, 09:12 AM,
Post: #11
|
|||
|
|||
RE: Autocom cdp+ problem
To take E60 tester, you need to roll back the firmware version 2013.3.0 ago. Put firmware 2013.2. Also check that you have the driver for usb and com port, and it is better to reinstall from the program.
|
|||
31-05-2015, 00:21 AM,
Post: #12
|
|||
|
|||
RE: Autocom cdp+ problem
For some bmw E60 and E90 you need to replace the diodes D701 and D703 for simple 1n4148
Try and report Regards |
|||
31-05-2015, 01:19 AM,
Post: #13
|
|||
|
|||
RE: Autocom cdp+ problem
The last CDP+ I bought comes with new design diodes D701 and D703, after the color were white and now a kind of gold/red.
I think you need to replace just in boards where are no diode, just a liteli piece with 000. I haven't try it yet on BMW E60. |
|||
31-05-2015, 08:14 AM,
Post: #14
|
|||
|
|||
RE: Autocom cdp+ problem
Replace two Capacitor on Si9241 Pin6 to 1nF (C5, C11).
|
|||
31-05-2015, 13:21 PM,
Post: #15
|
|||
|
|||
RE: Autocom cdp+ problem
|
|||
02-06-2015, 13:59 PM,
Post: #16
|
|||
|
|||
RE: Autocom cdp+ problem
|
|||
04-06-2015, 06:20 AM,
Post: #17
|
|||
|
|||
RE: Autocom cdp+ problem
This is old china autocom problem.
|
|||
28-06-2015, 20:03 PM,
Post: #18
|
|||
|
|||
RE: Autocom cdp+ problem
|
|||
17-08-2015, 20:10 PM,
Post: #19
|
|||
|
|||
RE: Autocom cdp+ problem
Hi friends!
I've got a problem with my cdp+clone. This is a 2 blue pcb version. Earlier, it works fine with my Grande punto diesel electronic, but not work Man Tga ecus. i can read any more electronics, but not work some motor ecus. In my punto works ABS, Inst, SRS, but the motor no. I change D701 and D703 for normal 1n4148, test all of relays, but not work. I can read Opel vectra 2000, suzuki wagonr 2000, but not a Peugeot 206 2001, fiesta 2006, and more... Anyone has any idea? Thanks |
|||
10-12-2015, 19:04 PM,
Post: #20
|
|||
|
|||
RE: Autocom cdp+ problem
Hi, recently we’ve purchased DS150E VCI (cloned Delphi) from autoobd2. On the picture below. What a piece of shit !!!
It cannot read BMWs or Merc cars. I replaced the diodes D701 and D703 for type 1n4148 , but it did not help . Lots of wasted. It could read Audi A4 (2008). The DVD supplied with the interface was also crap, couldn’t install . I had Delphi Release 3 ( 2014.2.2 ) from a different source, so installed that. Chinse supplier said that this is my software issue… I don’t think so . |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,477 |
26-04-2024, 08:06 AM Last Post: smilo |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,781 |
22-04-2024, 11:44 AM Last Post: kwat |
|
BMW E60 coding problem | GarageX | 8 | 362 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 167 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 277 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Dme Cas synchronization Problem | donjuan020 | 3 | 280 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 170 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
Entrynav2 Maps Problem | Chillmeister | 3 | 367 |
24-03-2024, 17:18 PM Last Post: Chillmeister |
|
For anyone having problem with ICOM NEXT FW update via ISTA+. | ImmBoo | 16 | 4,381 |
24-03-2024, 11:29 AM Last Post: Twointje |
|
Battery lead positive underfloor problem | da.2022 | 10 | 315 |
24-03-2024, 09:38 AM Last Post: pupu144 |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content