Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Advice after donor cas dme swap
08-07-2017, 16:26 PM, (This post was last modified: 08-07-2017, 16:27 PM by Silva1337.)
Post: #1
XZBMW  Advice after donor cas dme swap
Hello guys car is e65, dme dead i bought full package, DME CAS with key, replaced everthying works but there is little problem because swap is from LHD car, im planing perform full car flash with ista-p with donor vin , do i need add VO for EU settings? because now electrics in car works vice versa for example driver seat controls , control passenger seat.
Quote this message in a reply
08-07-2017, 17:24 PM, (This post was last modified: 08-07-2017, 17:26 PM by MaxBmw.)
Post: #2
RE: Advice after donor cas dme swap
Hi,
change - Typschlüssel - coding CAR
Give me the car details
Quote this message in a reply
[+] 2 users say Thank You to MaxBmw for this post
08-07-2017, 17:26 PM, (This post was last modified: 08-07-2017, 17:32 PM by Silva1337.)
Post: #3
RE: Advice after donor cas dme swap
Whats is "Typschlüssel" how to check?
car is now at guarded courtyard i only have oportunity to check at monday or tuesday , i can tell you vin if it helps

edit:
vin is WBAGL62080DJ91761
as i understand is GL62
engine is 745i n62
Quote this message in a reply
08-07-2017, 17:30 PM, (This post was last modified: 08-07-2017, 17:32 PM by MaxBmw.)
Post: #4
RE: Advice after donor cas dme swap
Is in VO
Give me the car details
Send me your VO - PM
Quote this message in a reply
08-07-2017, 17:34 PM,
Post: #5
RE: Advice after donor cas dme swap
Copy original FA from LM
and code acordingly,
virginize kombi
and that should be it

bikerdriveenjoy
Quote this message in a reply
[+] 2 users say Thank You to Levanime for this post
08-07-2017, 17:34 PM, (This post was last modified: 08-07-2017, 17:36 PM by MaxBmw.)
Post: #6
RE: Advice after donor cas dme swap
YES
VO - GL62 i code car
change VIN - CAS and DME
Quote this message in a reply
08-07-2017, 17:35 PM, (This post was last modified: 08-07-2017, 17:38 PM by Silva1337.)
Post: #7
RE: Advice after donor cas dme swap
From rheingold i see that code was GL61 oky guys understood ill make copy from LMA to cas then recode complete carmuch thanks , about dash i know
Quote this message in a reply
08-07-2017, 17:39 PM,
Post: #8
RE: Advice after donor cas dme swap
Properly should be like post # 6
Quote this message in a reply
08-07-2017, 17:40 PM, (This post was last modified: 08-07-2017, 17:41 PM by Silva1337.)
Post: #9
RE: Advice after donor cas dme swap
(08-07-2017, 17:39 PM)MaxBmw Wrote:  Properly should be like post # 6

so basically i need corect old one in LMA , as i remember that codes are written inside VO
than copy all vo from lma to cas, recode, flash all car to match vins
Quote this message in a reply
14-07-2017, 14:09 PM,
Post: #10
RE: Advice after donor cas dme swap
You have to write ISN + Vin from old dme or CAS in new DME.
Than resync
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Embedded SIM swap from TCB to ATM mcrussell 66 19,360 26-04-2024, 23:18 PM
Last Post: Napas
XZBMW 6wb cluster swap and coding xMoses 4 273 22-04-2024, 19:07 PM
Last Post: NikolaIMRS
XZBMW HU NBT with esys need advice. arthur101 3 174 20-04-2024, 22:00 PM
Last Post: kwork
  Engine swap E60 535d --> E61 530d coding advice requested Stratofortress 9 457 23-03-2024, 14:59 PM
Last Post: Simoniak
  BMW E87 swap M5 V10 coding cluster Pedrom92 0 139 20-03-2024, 22:50 PM
Last Post: Pedrom92
XZBMW X1 F48 MD1CS0001 Auric DME Swap bmw335coding 6 661 15-03-2024, 11:58 AM
Last Post: Tonysong
  E60 272KM 535 motor swap qbek90 0 91 10-03-2024, 11:55 AM
Last Post: qbek90
  Donor ECU and CAS bmw335d 1 171 09-03-2024, 00:23 AM
Last Post: bmchicago
  BMW G02 NBT need FSC instrument cluster swap Mr.Tester 1 160 07-03-2024, 21:10 PM
Last Post: painsage
  NBT SSD Swap superwofy 3 490 19-02-2024, 13:27 PM
Last Post: superwofy

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content