[pmazo]

Hello can anybody help me were to find immobiliser eeprom on astra h instrument cluster siemens vdo

[teerak2uk]

35080 ipc is paired to ecu bcm etc

[pmazo]

35080 ipc is paired to ecu bcm etc

HI i just want to remove from one instrument cluster and solder onto another if possible

[teerak2uk]

What's wrong with original dash

[pmazo]

What's wrong with original dash

nothing the clocks im trying to fit are opc ones its for a customer they all light up work fine immoblised as t\you would expect but i cant get a dump off it to rest with pin so i was going to just swap imobiliser eeprom if this is possible not sure if its shadowed by anny other chips thanks for your help

[teerak2uk]

Why can't you get a dump?

[pmazo]

Why can't you get a dump?

for some reason it just wont read it thats why i was just going to swap them or i could remove it and read it with xprog but need to know which chip it is it has three all the same

[teerak2uk]

Only one 35080 family chip on that board

---

Here you van see it

---

Just try swapping first but might need opcom after

[pmazo]

Thank you very much I'll get that swapped tomorrow