Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA/P
08-07-2017, 15:54 PM,
Post: #1
|
|||
|
|||
ISTA/P
Hello everyone,
Have a little issue need some help with. I was programming an e90 (12/05) with ISTA-P. Cas successfull. JBBE - error (Global.Vehicle.communication.CoAPI.2000) Ista stop the programming. I'm unable to connect to car with ista-d or inpa. Error from ista from pervious session - jbbe programing sport mode. Now car cluster needs will not work and I'm getting a sheering wheel lock error. Tools used. Original icom next a/b Can someone recommend anything? |
|||
08-07-2017, 16:08 PM,
(This post was last modified: 08-07-2017, 16:08 PM by bobdinro.)
Post: #2
|
|||
|
|||
RE: ISTA/P
If you connect the ICOM to your car dont have Ecu- s discovered?
You have a battery charger constant 14.0 volt? |
|||
08-07-2017, 16:19 PM,
Post: #3
|
|||
|
|||
RE: ISTA/P
(08-07-2017, 16:08 PM)bobdinro Wrote: If you connect the ICOM to your car dont have Ecu- s discovered? Hi, When I connect with ista I get unable to identify car. With INPA I Can only see jbbe and it say no service_error. Car is connectee with battery charger set to flash program with steady 14.1v. I tried to update the module with winfkp and received the following error no response. |
|||
08-07-2017, 16:35 PM,
Post: #4
|
|||
|
|||
RE: ISTA/P
(08-07-2017, 16:19 PM)Mizta Insane Wrote:(08-07-2017, 16:08 PM)bobdinro Wrote: If you connect the ICOM to your car dont have Ecu- s discovered? Try disconect battery for few ours and check again |
|||
08-07-2017, 16:53 PM,
(This post was last modified: 08-07-2017, 17:07 PM by bobdinro.)
Post: #5
|
|||
|
|||
RE: ISTA/P
You have ignition on in intrument cluster? kl 15, kl 30 14,1 volt?
Stop trying to flash! even if a flash fail you still must have ecus listed, RED, BLUE GREY or BROWN listed, you have to power the car ecus. JBE is faulty! |
|||
Reputation: +1 - Mizta Insane [+1] | |||
08-07-2017, 17:13 PM,
Post: #6
|
|||
|
|||
RE: ISTA/P
I got kl 15, 30 and 14v
I will replace jbbe and reply. I also did tried to disconnect and reconnect battery. |
|||
21-07-2017, 12:46 PM,
Post: #7
|
|||
|
|||
RE: ISTA/P
UPDATE: Replaced JBE was then able to complete programming.
|
|||
29-07-2017, 13:32 PM,
Post: #8
|
|||
|
|||
RE: ISTA/P
What is JBE. Thank.
|
|||
29-07-2017, 16:40 PM,
Post: #9
|
|||
|
|||
RE: ISTA/P
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ISTA+ 4.47.1x Install Files - MEGA | shawnsheridan | 37 | 3,727 |
1 hour ago Last Post: Twointje |
|
ISTA+ 4.47.2x Install Files - MEGA | shawnsheridan | 6 | 434 |
Yesterday, 23:04 PM Last Post: 2013m5 |
|
ista 4.46 Standalone | kiranabc | 104 | 12,811 |
Yesterday, 18:43 PM Last Post: kiranabc |
|
ISTA 4.47 test plan and error delete not available | bmwm3power | 7 | 442 |
Yesterday, 15:49 PM Last Post: bmwm3power |
|
Update ISTA at once 4.43.40 (ISTA Update Program) | charlesjyw | 38 | 7,786 |
Yesterday, 01:23 AM Last Post: jhon006 |
|
Ediabas 7.6.0 for ISTA 4.46 | dfb | 2 | 369 |
03-05-2024, 07:56 AM Last Post: duke99 |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,713 | 672,945 |
01-05-2024, 09:50 AM Last Post: Sedoy |
|
ista + 4.47 install | simplextibi | 1 | 485 |
30-04-2024, 12:22 PM Last Post: slackers |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 98 | 12,303 |
27-04-2024, 09:48 AM Last Post: egyclick |
|
ISTA 4.47.1x I-LEVEL+OVERVIEW | AutoExe3219 | 0 | 368 |
24-04-2024, 22:52 PM Last Post: AutoExe3219 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content