Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
31-08-2017, 11:25 AM,
Post: #11
|
|||
|
|||
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
What is the reason to upgrade icom? Since i had purchased it some time ago it didnt asked for upgrade when using ista or ista-p.
|
|||
31-08-2017, 12:25 PM,
Post: #12
|
|||
|
|||
BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 11:25 AM)avatarpr Wrote: What is the reason to upgrade icom? Since i had purchased it some time ago it didnt asked for upgrade when using ista or ista-p. It will if you install the official .msi for the upgrade. It will prompt you for the upgrade when connecting to a vehicle. Sent from my iPhone using Tapatalk Pro If this post helped you in anyway please use the thanks and/or REP buttons down here. Thanks!
|
|||
30-09-2017, 00:32 AM,
Post: #13
|
|||
|
|||
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 02:31 AM)Wesk18 Wrote: Didn't work for me I fixed it in post #8 of this thread sorry for the initial error, I couldn't find my A2 at the time to test it, but I have now. If this post helped you in anyway please use the thanks and/or REP buttons down here. Thanks!
|
|||
04-02-2018, 13:09 PM,
Post: #14
|
|||
|
|||
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
|
|||
27-02-2018, 22:17 PM,
Post: #15
|
|||
|
|||
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi friends
i can use this version to update firm in ICOM A2 firmrev136 actually ? thanks |
|||
28-02-2018, 06:44 AM,
Post: #16
|
|||
|
|||
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
|
|||
05-03-2018, 19:58 PM,
(This post was last modified: 06-03-2018, 00:16 AM by Clusters.)
Post: #17
|
|||
|
|||
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi,
i got an ICOM A2 Clone with 3-15-00 on it (reachable over web UI) and tried to update it with this version. I got immediately after Bootimage flash start the error that it could NOT be successfully updated. Icom dont worked afterthat normally and flashing red light COMM. In the update log file it stays: "Signature check failed" Did someone have this error and what is the solution? - Should I try again on some other way? - Should I try to restore the ICOM image and how to that right? - Is this guide still useable, becouse it seems to be for A1? - Thanks in Advance for hints Solved: Followed the procedure in the pdf with ICOM_Restore over the file from this topic. Now it is working like a charm, Phiyy |