Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Any way to get EVO with APIX2 from G to work with APIX1?
|
04-12-2016, 11:50 AM,
Post: #1
|
|||
|
|||
|
Any way to get EVO with APIX2 from G to work with APIX1?
Have a G series EVO here, has APIX1 and APIX2, APIX1 is for kombi if I am not mistaken and APIX2 for actual screen.
I changed the display settings to APIX 1 etc but not working, I went from NO SIGNAL to black screen. Anyway to get this to work with APIX 1 screen or not? Cheers |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
04-12-2016, 12:15 PM,
Post: #2
|
|||
|
|||
|
RE: Any way to get EVO with APIX2 from G to work with APIX1?
Im 99% not possible by coding, you will need power regulator
Please, Press the Buttons
![[Image: postbit_thx.gif]](http://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_thx.gif) and ![[Image: postbit_reputation.gif]](http://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) if This post help or is usefull for you! Not is needed write just only thanks in Threads  |
|||
| Reputation: +1 - ROD-BENDERS [+1] | |||
|
|
|
04-12-2016, 12:17 PM,
Post: #3
|
|||
|
|||
|
RE: Any way to get EVO with APIX2 from G to work with APIX1?
G series EVO wouldn't work on bench with cas4+zgw or fem.
FSCMap -> FemtoEVO
portal.femtoevo.com online geration VO/FA by VIN, FSC sets, MGU ViM , FSC for Map Updates ROUTE / EVO / CIC / CHAMP / NBT MD1/MG1 06.2020+ DME unlocking services. 1CR Enable for 06.2020+ EU cars (G series, petrol/DIESEL - RU only). NCD sign for coding 2.0 for selected portal users.  instagram: @femtoevo |
|||
|
|
|
04-12-2016, 12:41 PM,
Post: #4
|
|||
|
|||
|
RE: Any way to get EVO with APIX2 from G to work with APIX1?
|
|||
|
|
|
24-09-2017, 22:02 PM,
Post: #5
|
|||
|
|||
|
RE: Any way to get EVO with APIX2 from G to work with APIX1?
Intersted actually! I install EVo with F10 and f15 screens all the time, and just recently figured that G30 body has issue like that! G11 body doesn't it seems!
So big UP to this thread! ----- my experience ------ after coding all parameters on G30 body screen gose completely off, I don't think even back light is on. Which leads me to the questions: - is power out still the same after coding APIX1? (I have power leed seperate, and I think I disconnected apix while power was in, and it was still blank! Will test power out later my self) Was it helpful? Greatenjoy,
please click click Respect ------  and ---------------------------------------------------------------------------------------------------- Thanks |
|||
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
