Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[req] CIC JTAG pin diagram and some hints
26-10-2017, 21:49 PM,
Post: #11
|
|||
|
|||
RE: [req] CIC JTAG pin diagram and some hints
(20-10-2017, 07:52 AM)IZGOY Wrote: There is nothing!!! I would check internal CiC power supplies for correct values, FOT thermistor, supply line short, V850 IOC chip. Could be many things, unfortunately. Voltages always on: 3.4V and 5V regardless of standby/operating modes; Voltages that are enabled by IOC feeding application processor board: +8V, + 2.5, +3.3, +5V. |
|||
27-10-2017, 09:28 AM,
Post: #12
|
|||
|
|||
RE: [req] CIC JTAG pin diagram and some hints
You need reprogram for GL512 chip on desktop bench with programmer( for example ELNEC)
|
|||
05-01-2018, 16:32 PM,
Post: #13
|
|||
|
|||
RE: [req] CIC JTAG pin diagram and some hints
(13-09-2017, 14:10 PM)emhtuning Wrote: Hello , Hello, you were able to restore your CIC? Thanks |
|||
05-01-2018, 18:22 PM,
Post: #14
|
|||
|
|||
RE: [req] CIC JTAG pin diagram and some hints
Hi all
Is there anyone who can help me with JTAG commands on CIC? how can i start Emergency boot? Thanks. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content