[pilif]

Hi friends.

I am having troubles in connections whit those two MCU's.
I can not read them that's pretty annoying.
Can someone share some connections schemes ?

MC68HC11KA4 - vw Beta 5 radios
TMP47P860N - Vw gamma 3 2404+2404 ?

I own an Orange 5, XProg-m(fresh converted to Luis Andre Version), TL866CS ( fresh converted to TL866A) and an PICkit 3

I hope that those are enough

Kindly Regards, pilif

[masterskay62]

Hi.
    MC68HC11KA4

[cubica]

Regarding gamma3 (2 x 24c04) it is too much old radio, but...
you need to build an interface and connect to radio and start simulating code entry from front panel..u need win 98se PIII 800Mhz and pure DOS...a little bit too much old stuff for young members here
This was my first decoded radio in my life thanks to russian decode brothers
regards,
cuby

[audio]

Hi!
My Gamma3 decoding
Big thanks for programmer, unfortunately, I do not know but high regard thanks.
wbr.

[cubica]

Simple said ART I think this working only on 24c02+24c04 version?
rgds,
cuby

[audio]

Simple said ART I think this working only on 24c02+24c04 version?
rgds,
cuby

I do not know it was a long time ago
watch the clock speed of 133 MHz hehe computer, even until what I use

[gregory77]

Hi,

Could you send me the software?

Thanks,
Gerogry

Regarding gamma3 (2 x 24c04) it is too much old radio,  but...
you need to build an interface and connect to radio and start simulating code entry from front panel..u need win 98se PIII 800Mhz and pure DOS...a little bit too much old stuff for young members here
This was my first decoded radio in my life thanks to russian decode brothers
regards,
cuby