Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
6WA Kombi - R270 eeprom erase
22-05-2018, 22:20 PM,
(This post was last modified: 22-05-2018, 22:23 PM by smilo.)
Post: #1
|
|||
|
|||
6WA Kombi - R270 eeprom erase
Hi,
Someone got a problem with some clusters 6WA when eeprom erasing using R270 ? I have the problem with two Kombi: 6WA F20 and 6WA F10 (from 2013/2014). When I read 160DXXX eeprom, I have a file with 80808080.. in all bits. I can change some bits, then write without error, but when I read again the eeprom, I don't find my changes - again only 808080.. everywhere. I also tried to write a complete file from another 6WA, but I have an error in the bit 1F. Your ideas please ? |
|||
23-05-2018, 05:18 AM,
Post: #2
|
|||
|
|||
RE: 6WA Kombi - R270 eeprom erase
Did you solder the Eprom?
|
|||
23-05-2018, 06:01 AM,
Post: #3
|
|||
|
|||
6WA Kombi - R270 eeprom erase
No, I use a clip to connect directly to the eeprom on the PCB -
Works fine with other clusters (Kombi an DKombi) |
|||
23-05-2018, 06:40 AM,
Post: #4
|
|||
|
|||
RE: 6WA Kombi - R270 eeprom erase
Thats true - works fine
But the last cluster i had, i cant over-write it - than i had desolder the chip and put it in the Socket - than the flash was successfull |
|||
23-05-2018, 08:04 AM,
Post: #5
|
|||
|
|||
RE: 6WA Kombi - R270 eeprom erase
I will try to desolder the eeprom and flash it on socket - thank you.
Any advice for this method ? I always used a clip.. |
|||
23-05-2018, 12:06 PM,
Post: #6
|
|||
|
|||
RE: 6WA Kombi - R270 eeprom erase
(23-05-2018, 08:04 AM)smilo Wrote: I will try to desolder the eeprom and flash it on socket - thank you. desoldering is everytime better and exactlier? >> BMW FSC/SFA codes service <<
NCD 2.0 ~ SFA Tokens, FSC, 1AA Region Change ~ MGU1, MGU2, MGU2_2 KAFAS, NiVi, MGU, MRR ~ FSC retrofit codes |
|||
23-05-2018, 14:43 PM,
Post: #7
|
|||
|
|||
RE: 6WA Kombi - R270 eeprom erase
|
|||
23-05-2018, 17:14 PM,
Post: #8
|
|||
|
|||
6WA Kombi - R270 eeprom erase
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
E85 cluster eeprom VIN location | stydly | 3 | 102 |
Yesterday, 19:47 PM Last Post: gabur431 |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 82 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
G12 used Kombi 35128WT | palapas1974 | 14 | 571 |
29-04-2024, 17:54 PM Last Post: johann74270 |
|
E60 M5 KOMBI cruise control | bmwfnatic | 4 | 194 |
29-04-2024, 09:51 AM Last Post: bmwfnatic |
|
BMW MD1/MG1 ISN Extractor from EEPROM Dump | Czozen | 31 | 7,610 |
28-04-2024, 21:39 PM Last Post: luul |
|
CAS2 TO CAS3 EEPROM | DEJMIEN | 9 | 281 |
28-04-2024, 05:58 AM Last Post: 16eddi67 |
|
F10 FRM III eeprom needed for repair | claw | 0 | 82 |
19-04-2024, 16:16 PM Last Post: claw |
|
BMW 420i B48 (2018) EEPROM/full dump | lagunasec | 2 | 154 |
17-04-2024, 17:07 PM Last Post: lagunasec |
|
Eeprom dump needed for EHC E60 | Matthew53 | 0 | 74 |
15-04-2024, 22:27 PM Last Post: Matthew53 |
|
Damaged the EEPROM 95128 in FEM | wxwwxw | 6 | 566 |
08-04-2024, 14:25 PM Last Post: Jumper |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content