Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW ISTA P single module coding
24-09-2018, 15:23 PM,
Post: #11
|
|||
|
|||
RE: BMW ISTA P single module coding
Go go ECU tree click on desired ecu and from there you remove the actions.
|
|||
29-09-2018, 01:56 AM,
Post: #12
|
|||
|
|||
RE: BMW ISTA P single module coding
you have to goin control module tree where it show each module the click on the moude showing up in red or with a ? mark after you clickot module it should pop upa window click on second tab click hide option after a few the scrolling lines will stop and it hidden , roceed with any other in same way , and determine measure plan it will still say replace go go alnoe with it after a while it will redisplay what istap is going to do it will go thru
hope this help good day thanks or rep if you don't mind only if it help you. |
|||
29-09-2018, 10:06 AM,
Post: #13
|
|||
|
|||
RE: BMW ISTA P single module coding
I tried this hide actions before and it never worked with a car that had issues with the most units. Ill try again and see.
|
|||
29-09-2018, 10:11 AM,
(This post was last modified: 29-09-2018, 10:12 AM by iyade46.)
Post: #14
|
|||
|
|||
RE: BMW ISTA P single module coding
if ista p ask you to replace module then ista p see there is no connection to that ecu so it ask you to replce it to be sure look for radio in ecu tree there it it's marked as red so that is the problem
good luck if you want help i can remotly help wiuth teamviewer |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content