Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW f31 led fog lights Coding help
15-10-2018, 18:47 PM,
Post: #1
|
|||
|
|||
BMW f31 led fog lights Coding help
hello, I have a BMW f31 I put the fog lights led oem, with the bimmercode deactivated to not check the lamps and not the error, but the lights after a while on start to flash. Has anyone else had this problem?
|
|||
16-10-2018, 02:05 AM,
Post: #2
|
|||
|
|||
RE: BMW f31 led fog lights Coding help
coding FEM_BODY module:
3061 NSW_R_KALTUEBERWACHUNG -> nicht_aktiv : Disabling cold check for Front Right Fog Light. 3061 NSW_R_WARMUEBERWACHUNG -> nicht_aktiv : Disabling warm check for Front Right Fog Light. 3061 NSW_R_IS_LED -> aktiv : Setting Front Right Fog type to LED. 3061 NSW_L_KALTUEBERWACHUNG -> nicht_aktiv : Disabling cold check for Front Left Fog Light. 3061 NSW_L_WARMUEBERWACHUNG -> nicht_aktiv : Disabling warm check for Front Left Fog Light. 3061 NSW_L_IS_LED -> aktiv : Setting Front Left Fog type to LED. |
|||
16-10-2018, 22:25 PM,
Post: #3
|
|||
|
|||
RE: BMW f31 led fog lights Coding help
Thank you but it does not work on it. after about 2 minutes on it starts blinking if you turn it off and on it stays normal for another 2 minutes. with cornering light also blinks if you have some time with the direction to the same side.
|
|||
16-10-2018, 22:37 PM,
Post: #4
|
|||
|
|||
RE: BMW f31 led fog lights Coding help
Try updating FEM and add 5A1 to VO and code it.
|
|||
31-08-2019, 20:15 PM,
Post: #5
|
|||
|
|||
RE: BMW f31 led fog lights Coding help
@blax123 thanks for tue info. i was trting to code but is no working after i update the FEM_BODY It worked fine.
|
|||
03-09-2019, 06:16 AM,
(This post was last modified: 03-09-2019, 06:18 AM by donke.)
Post: #6
|
|||
|
|||
RE: BMW f31 led fog lights Coding help
(16-10-2018, 02:05 AM)nguyennghi Wrote: coding FEM_BODY module: I've had the same problems with the flickering LEDs after two minutes, when I'm using the corner lights, so when the steering wheel was not in the correct middle position. For this, please add the following codings: 3061 NSW_R_UE_SPG_SCHUTZ -> dimmed 3062 MAPPING_ABBIEGEL_R_PWM_LEVEL_1 -> 100% 3063 MAPPING_NEBELSCHW_R_PWM_LEVEL__1 -> 100% and of course for the left side: 3061 NSW_L_UE_SPG_SCHUTZ -> dimmed 3062 MAPPING_ABBIEGEL_L_PWM_LEVEL_1 -> 100% 3063 MAPPING_NEBELSCHW_L_PWM_LEVEL__1 -> 100% Since this codings the fog lights will work as expected (16-10-2018, 22:37 PM)blax123 Wrote: Try updating FEM and add 5A1 to VO and code it. Thanks, the VO coding was the one missing point for my car. So I can now add this to my car, too and I will be on the save side, if the car will get an update by an inspection ... |
|||
03-09-2019, 07:22 AM,
Post: #7
|
|||
|
|||
RE: BMW f31 led fog lights Coding help
5A1 ... VO and coding FEM - I try this and working perfect ...
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW F36 US > EU conversion no High Beam lights | zygi898 | 3 | 68 |
5 hours ago Last Post: evaldazj |
|
Bmw e53 dsc coding | hero3838 | 4 | 44 |
09-05-2024, 20:04 PM Last Post: hero3838 |
|
coding 2018 bmw bike with ncs expert | carlosabh71 | 13 | 1,584 |
09-05-2024, 14:25 PM Last Post: TheNine90 |
|
Motorrad esys coding using ENET and ICOMD cable | bennymx | 17 | 2,932 |
09-05-2024, 11:20 AM Last Post: Vojno |
|
BMW E71 EGS coding 8HP70 used | BS68 | 5 | 349 |
08-05-2024, 11:19 AM Last Post: EngineerX |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 86 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 90 |
27-04-2024, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,133 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 248 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 611 |
25-04-2024, 23:32 PM Last Post: Furgus |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content