Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CIC - COMBOX retrofit
02-11-2018, 09:46 AM,
Post: #11
|
|||
|
|||
RE: CIC - COMBOX retrofit
(01-11-2018, 12:39 PM)zmaj Wrote: Hi, I have an issue with the combox.When you code the whole bridge must need be closed, even the diagnostic socket.Try by odb |
|||
02-11-2018, 12:15 PM,
Post: #12
|
|||
|
|||
RE: CIC - COMBOX retrofit
The bridge is okey. So no error on most. Anymore. I gave it power with pin 1 and 2 on the combox but nothing. No power on the usb port and and bluetooth greyed out on cic. On the diagnostic side obd/can and most is working. At the begining I gave it power on pin 2 but as it is media it required power on pin 1 and the most error was gone. But combox still not showing up. I hope there is a way to get it work.
|
|||
05-11-2018, 21:21 PM,
Post: #13
|
|||
|
|||
RE: CIC - COMBOX retrofit
Sooooo, Ive got it connected to the mac and got an error message from the UART output from the combox.
Interupt controller not supproted! I think maybe the software is trash on this thing. |
|||
06-11-2018, 14:51 PM,
Post: #14
|
|||
|
|||
RE: CIC - COMBOX retrofit
why don´t try to connect via Ista+? Check if there is CBX MEDIA shown or not? Maybe your settings and Data are not uptodate. f.e.in the Ediabas Folder...
Coding should work with ICOM via OBD...can not remember that I´ve used MOST_ASYNC_ab625 for coding the CBX (it´s long time ago) Maybe I can try via Temaviewer if u want and if u are sure that your harness is ok on combox |
|||
06-11-2018, 23:12 PM,
Post: #15
|
|||
|
|||
RE: CIC - COMBOX retrofit
Got the cli work but it seams that its a board error since it work for 15 seconds and than the power drops and it blocates. A bad capacitor or something similar. I will send it back where i bought it. They will send me another one.
|
|||
14-12-2022, 14:50 PM,
Post: #16
|
|||
|
|||
RE: CIC - COMBOX retrofit
What is the OEM number that connects the Combox to the USB port in the center console for the E9x. Unfortunately, I can't select it via Etk
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 40 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 242 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 2 | 200 |
14-05-2024, 12:46 PM Last Post: Bluposeidon |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 399 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 105 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 221 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 102 |
08-05-2024, 14:22 PM Last Post: hitit |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 892 | 470,983 |
07-05-2024, 04:30 AM Last Post: SkeYT |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,573 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 708 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content