[matte992it]

Hello, 

i've to correct KM on Mercedes A-Class W176 2013 (Black&white tacho not important..) 
i understand that i've to use Digiprog 3 4.94 (obd work but for a correct work st01 cable on eprom 95640 inside cluster) 
and after do work on eprom on cluster before start car i need to put Can filter behind Cluster for block esz sync.. 

it is correct and work this procedure? 

please help me to have confirm about this

[SChip]

Before connecting dash back put can filter

[matte992it]

Before connecting dash back put can filter

Ok, so with digiprog 3 4.94 i can do work with st01 cable without desolder eproom? 
I’ve now open cluster is easy to do if i can use cable st01 of digiprog

And before put key in ezs i’ve to install can filter in back of cluster.. all work without battery.

[SChip]

Before connecting dash back put can filter

Ok, so with digiprog 3 4.94 i can do work with st01 cable without desolder eproom? 
I’ve now open cluster is easy to do if i can use cable st01 of digiprog

And before put key in ezs i’ve to install can filter in back of cluster.. all work without battery.

Yes, but first with digiprog enter eeprom menu and select 95640, read it and save it, so you have backup saved on digiprog, also best option is to desolder eeprom

[matte992it]

Before connecting dash back put can filter

Ok, so with digiprog 3 4.94 i can do work with st01 cable without desolder eproom? 
I’ve now open cluster is easy to do if i can use cable st01 of digiprog

And before put key in ezs i’ve to install can filter in back of cluster.. all work without battery.

Yes, but first with digiprog enter eeprom menu and select 95640, read it and save it, so you have backup saved on digiprog, also best option is to desolder eeprom

Ok many thanks but also work without desoldering?
So first eeprom menu for backup,
Do u know if in digiprog v 4.94 in mercedes menu there are w176 ? 
I see that are present in compatibility car

[forkade]

this model only wiht can blocker