[ramzn]

Now the next Problem:
When I read the CAFD Codes from my F25, the FDL Editor shows no name on parameter folders. I only get a dot "." in place of that.
All other ecu´s read and fdl coding with Parameter Perfekt.

[Lux]

Right click on the esys.exe, go to properties then in the compatibility menù, set to windows 7 and select run as administrator.. that's all.

[Abou Jambo]

Hi everyone!

Everyday i got a PM's with questions :

How to activate CarPlay on ID4 ?
It's impossible? I heard someone can flash it,but i'm n00b and don't know what to do...
How to update ID4 HU_NBT2 to ID5 or ID6 ?
What i need? What is E-sys? How to calculate right TAL ? 
Where to get actual psdzdata?

I have created this small package with all things, that you will need to know durning conversion ID4 to ID5 / ID6 - all in one place. You don't need think how to calculate correct TAL, why it's calculates wrong and etc. All package is ready to use. You will need 45-50 minutes for flashing your EVO.
Don't forget to connect car charger!
You can flash evo without charger on good battery, but don't forget - you do it on your own risk.

In attachment you will find 3 links on MEGA.nz
1. Esys 3.33 x64 + extra software
2. Set of psdzdata needed to flash or update ANY NBTevo ID4 to ECE/USA ID5 or ID6 (it depends on coding) 
3. Set of psdzdata needed to flash or update ANY NBTevo ID4 to ASIA (Taiwan, China, Japan, Korea) ID5 or ID6 (it depends on coding) 

Also i've added pictures, that describes HW types of EVO , SW types and Map types.

Each set of psdzdata includes special TAL  that allows you to flash ANY NBTevo to ID5 or ID6.
All you need is just select correct TAL - ECE or USA. For ASIA it's easier to do - there is only one TAL.
This psdzdata is trimmed down and includes files only for NBTevo !!!

Please note - ID4 EVO have only 2GB of RAM (compared to the 4GB for the factory ID5 units)
You may (or may not) experience sporadical reboots etc, we are not responsible for this.

Ok, i've done flashing. What i need to know and what is my next step? 

My Navigation is not working anymore and how to get CarPlay?  

NBTevo ID4 and NBTevo ID5/ID6 has different sets of FSC codes. 

Don't forget to check if your car have WiFi aerial!

If you don't want to remove EVO from the car - just code it with your new VO matched for ID5 or ID6 and then check error messages with Tool32 or ISTA. 
You will see error message about missing Wi-Fi aerial if it's, indeed, missing.


There is a list of all available FSC codes ID4 :


006F - Satellitentuner
009C - BMW Apps
009E - iSpeech
009F - TTS
00A0 - Navigationssystem Professional ECE / US
00A1 - Navigationssystem Professional ASIA
00E5 - M Laptimer
00F0 - EVO ID4 Navigation
00F1 - Map code for Europe (or another country if needed)


FSC codes needed for NBT EVO ID5 / ID6 :
006F - Satellitentuner
009C - BMW Apps
009E - iSpeech
009F - TTS
00A0 - Navigationssystem Professional ECE / US
00A1 - Navigationssystem Professional ASIA
00E5 - M Laptimer
016E - Speech NLU
016F - Speech TTS
0143 - Apple CarPlay
0120 - EVO ID5 Map for Europe as example ( another country - please check map list.)
0170 - Component protection ( usually not needed )

If you have any questions - feel free to ask me.

PM, SUB, REP, etc appreciated. 

Post will be updated, coming next:
APIX coding (NBT screens);
Coding / FA coding;
Component protection explained.
Stay tuned!

thank you for sharing, when flashing ID4 to ID5 with the blue GPS antenna still be working or ATM must be installed to obtain GPS link?

[Almaretto]

Now the next Problem:
When I read the CAFD Codes from my F25, the FDL Editor shows no name on parameter folders. I only get a dot "." in place of that.
All other ecu´s read and fdl coding with Parameter Perfekt.

If using Launcher Premium, that means you either selected incorrect chassis or system memory/configuration issue.

[futa]

I have a question for FSCMAP.
Do I need to use downloaded FA?
HU is Japanese head unit of Alpine.

After flushing with F20, insert CAFD and VO code, nothing is displayed on the monitor.

Please tell me how to solve it.

[Deathwink]

cut

Can I use for flash a mini f56 id4 to id5?
It's possible to check the amount of ram without to pull out the head unit? It's a 2017 car

[FSCmap]

cut

Can I use for flash a mini f56 id4 to id5?
It's possible to check the amount of ram without to pull out the head unit? It's a 2017 car

Yes, send me your vin in PM.

---

I have a question for FSCMAP.
Do I need to use downloaded FA?
HU is Japanese head unit of Alpine.

After flushing with F20, insert CAFD and VO code, nothing is displayed on the monitor.

Please tell me how to solve it.

you need code in fdl

• CID_APIX_MODE apix1 = 01 
• CID_COLOR_DEPTH 18 = 01 
• CID_COM_MODE Left: spi = 01 

[Deathwink]

[quote="FSCmap" pid='409781' dateline='1547063180']
cut

Can I use for flash a mini f56 id4 to id5?
It's possible to check the amount of ram without to pull out the head unit? It's a 2017 car

Yes, send me your vin in PM.
FSCmap has reached their private message quota so your message could not be sent

[FSCmap]

[quote="FSCmap" pid='409781' dateline='1547063180']
cut

Can I use for flash a mini f56 id4 to id5?
It's possible to check the amount of ram without to pull out the head unit? It's a 2017 car

Yes, send me your vin in PM.
FSCmap has reached their private message quota so your message could not be sent

fixed.

[futa]

It is an additional question.
① Before flushing, should fsc of id 4 be deleted with tool 32?
② Should I use the FA in the sample