Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Good China GNA600
04-07-2015, 22:22 PM,
Post: #12
|
|||
|
|||
RE: Good China GNA600
I used a differeny dll for honda passthrough J2534_dist software, in the registry "FunctionLibrary, which I forgot to change again to the HDS respective dll in Genrad. I have to try again.
I did not run anything in compatibility mode because I am using the Wow6432Node. ---- Update Still no luck with DS253432-04.dll As I said the problem is the X-horse 1.4.8 driver which does not install the dll files, the sys files and does not register them. ---- Update After installing all dll files(from X-horse driver) to the windows system32 directory and the sys files (from the X-horse driver) to the windows system32 drivers directory the X-horse HDS is working It took me ages. but yes it works. It will take me another 5 hours to remember and write /document what I did. I guess the problem is the xhorse msi for honda which cannot install in x64 windows. Otherwise it would work. To make things easier I have a new registry file which makes the hds recognise a new mvci driver called X-horse rather than using GNA600. (Note If I choose compatibility mode XP HDS fails to load.) When I select a new vehicle with HDS then radio blue light appears on the X-horse and Honda Diagnostic System Initializing please wait....... The solution is the following: As I said this was not easy. It was not supposed to work with x64 bit environment beacause the x-horse msi does not install, + we need a new registry as a new driver called X-horse + we need to copy the X-horse driver dll, sys files to system32 folder, + we need to copy dll files + to copy the X-horse files found in runtime to C://Genrad Windows volume folder I will make a youtube video showing that it is working on x64 environments and can do diagnostics on my honda car. So it can do 1. passthru Control Module Reprogramming through the honda j2534 software with a hack it can work in x64 environments too 2. it can work with latest HDS software to do all honda diagnostics and with a hack it can work in x64 environments too 3 I have not tried the Control module updates from the HDS software (1 above does the same thing I guess) 4. I dont know if it can make any calibrations, but I dont think so. |
|||
Reputation: +1 - jaimie946 [+1] | |||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Good China GNA600 - by thusithasam - 07-06-2014, 04:01 AM
RE: Good China GNA600 - by shaan - 07-06-2014, 15:41 PM
RE: Good China GNA600 - by thusithasam - 08-06-2014, 17:54 PM
RE: Good China GNA600 - by Inspector_Gadget - 02-07-2015, 08:55 AM
RE: Good China GNA600 - by apoelistas - 03-07-2015, 14:06 PM
RE: Good China GNA600 - by 912secured - 22-09-2014, 04:06 AM
RE: Good China GNA600 - by apoelistas - 02-07-2015, 08:20 AM
RE: Good China GNA600 - by Inspector_Gadget - 03-07-2015, 20:21 PM
RE: Good China GNA600 - by apoelistas - 03-07-2015, 23:29 PM
RE: Good China GNA600 - by apoelistas - 04-07-2015, 00:38 AM
RE: Good China GNA600 - by Inspector_Gadget - 04-07-2015, 19:28 PM
RE: Good China GNA600 - by apoelistas - 04-07-2015, 22:22 PM
RE: Good China GNA600 - by apoelistas - 05-07-2015, 08:33 AM
RE: Good China GNA600 - by Inspector_Gadget - 05-07-2015, 18:53 PM
RE: Good China GNA600 - by apoelistas - 05-07-2015, 20:45 PM
RE: Good China GNA600 - by Inspector_Gadget - 06-07-2015, 08:45 AM
RE: Good China GNA600 - by microqman - 06-07-2015, 01:59 AM
RE: Good China GNA600 - by thusithasam - 06-07-2015, 03:05 AM
RE: Good China GNA600 - by apoelistas - 06-07-2015, 11:01 AM
RE: Good China GNA600 - by Solidtrick - 10-07-2015, 11:26 AM
RE: Good China GNA600 - by apoelistas - 11-07-2015, 18:10 PM
Good China GNA600 - by Solidtrick - 12-07-2015, 02:08 AM
RE: Good China GNA600 - by Inspector_Gadget - 12-07-2015, 10:33 AM
Good China GNA600 - by Solidtrick - 12-07-2015, 13:12 PM
RE: Good China GNA600 - by Inspector_Gadget - 12-07-2015, 17:07 PM
Good China GNA600 - by Solidtrick - 12-07-2015, 18:03 PM
RE: Good China GNA600 - by Inspector_Gadget - 13-07-2015, 07:51 AM
Good China GNA600 - by Solidtrick - 12-07-2015, 23:56 PM
Good China GNA600 - by Solidtrick - 13-07-2015, 10:52 AM
RE: Good China GNA600 - by Inspector_Gadget - 13-07-2015, 15:10 PM
RE: Good China GNA600 - by Solidtrick - 13-07-2015, 15:22 PM
RE: Good China GNA600 - by Inspector_Gadget - 14-07-2015, 08:06 AM
Good China GNA600 - by Solidtrick - 14-07-2015, 13:13 PM
RE: Good China GNA600 - by Inspector_Gadget - 14-07-2015, 17:04 PM
Good China GNA600 - by Solidtrick - 14-07-2015, 20:07 PM
RE: Good China GNA600 - by apoelistas - 14-07-2015, 22:29 PM
Good China GNA600 - by Solidtrick - 15-07-2015, 01:22 AM
RE: Good China GNA600 - by apoelistas - 15-07-2015, 19:19 PM
RE: Good China GNA600 - by Solidtrick - 15-07-2015, 20:01 PM
RE: Good China GNA600 - by apoelistas - 15-07-2015, 20:07 PM
Good China GNA600 - by Solidtrick - 15-07-2015, 21:28 PM
RE: Good China GNA600 - by apoelistas - 15-07-2015, 23:48 PM
Good China GNA600 - by Solidtrick - 16-07-2015, 01:17 AM
RE: Good China GNA600 - by apoelistas - 16-07-2015, 01:35 AM
RE: Good China GNA600 - by jaimie946 - 17-03-2016, 06:29 AM
RE: Good China GNA600 - by apoelistas - 27-04-2016, 17:26 PM
RE: Good China GNA600 - by meiguang - 12-05-2016, 11:15 AM
RE: Good China GNA600 - by apoelistas - 13-05-2016, 13:34 PM
RE: Good China GNA600 - by meiguang - 16-05-2016, 11:15 AM
RE: Good China GNA600 - by apoelistas - 17-05-2016, 09:00 AM
RE: Good China GNA600 - by meiguang - 18-05-2016, 02:32 AM
RE: Good China GNA600 - by apoelistas - 18-05-2016, 08:51 AM
RE: Good China GNA600 - by meiguang - 18-05-2016, 11:47 AM
RE: Good China GNA600 - by apoelistas - 18-05-2016, 13:54 PM
RE: Good China GNA600 - by apoelistas - 18-05-2016, 18:57 PM
RE: Good China GNA600 - by meiguang - 20-05-2016, 08:45 AM
RE: Good China GNA600 - by thusithasam - 03-09-2016, 02:06 AM
RE: Good China GNA600 - by apoelistas - 23-10-2016, 21:08 PM
RE: Good China GNA600 - by thusithasam - 02-06-2017, 06:27 AM
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
HDS 3.017.012 GNA600 + HIM + SPX + XHORSE + J2534 | Inspector_Gadget | 45 | 26,468 |
29-04-2017, 14:47 PM Last Post: apoelistas |
|
Unable to connect GNA600 | daamianr | 1 | 1,488 |
15-02-2016, 12:35 PM Last Post: meiguang |
|
Honda HDS TO Work with HIM and GNA600 Reg file | TizWoz | 12 | 12,517 |
12-05-2014, 17:13 PM Last Post: thusithasam |
|
Honda HDS TO Work with HIM and GNA600 Reg file | TizWoz | 11 | 9,708 |
17-04-2014, 02:28 AM Last Post: kingauto |
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Return to TopReturn to Content