Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VAS5054A PCB Difference
29-09-2017, 21:45 PM,
(This post was last modified: 29-09-2017, 21:46 PM by Enabled.)
Post: #81
|
|||
|
|||
RE: VAS5054A PCB Difference
(29-09-2017, 21:14 PM)ninja_zx11 Wrote:(29-09-2017, 20:48 PM)Enabled Wrote: Here we go. Got out the old soldering iron and removed the Samsung and installed my ISSI modules, before the 168hr is up Yes, and lots of flux. This time I used solder with some lead in it. I also installed LT3010 and it is not good at all. It will make the tool not power on. Just 1 flash of the LED and off. I put the original chinese design voltage regulator and it worked again. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Odis S 7.2.1 + E 12.2.0 for Vas5054a Win10 Updated2023 Vmware | srzar | 3 | 1,132 |
20-01-2024, 16:23 PM Last Post: lalle |
|
Drivers VAS5054A blue | MORKAS | 1 | 339 |
28-12-2023, 22:46 PM Last Post: vagvag |
|
VAS5054A PassThru drivers | audi666 | 6 | 486 |
22-12-2023, 09:46 AM Last Post: audi666 |
|
VAS5054A clone drivers HELP | Dišovas | 4 | 876 |
13-09-2023, 10:31 AM Last Post: Peterwall |
|
Spotting a good VAS5054a clone interface in 2023 | Yonder | 9 | 900 |
29-08-2023, 08:32 AM Last Post: audi666 |
|
Latest Odis S and E versions that work with VAS5054A? | getaibose | 8 | 1,077 |
22-07-2023, 17:30 PM Last Post: audi666 |
|
VAS5054A w. PassThru and Odis | Projectns | 4 | 1,005 |
03-07-2023, 11:56 AM Last Post: aaronpaul |
|
SVCI 6154A vs VCX NANO 6154A vs VAS6154A clone vs VAS5054A | codingbmwsofia | 14 | 2,538 |
27-06-2023, 15:58 PM Last Post: nigeeemac999 |
|
vas5054a software | coder | 7 | 890 |
14-06-2023, 16:48 PM Last Post: Tekero |
|
Difference firmware dq500 | drjb | 0 | 221 |
12-04-2023, 16:25 PM Last Post: drjb |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content