Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Requesting Missing : HWAP, HWEL for Esys
10-08-2019, 09:01 AM,
Post: #1
|
|||
|
|||
Requesting Missing : HWAP, HWEL for Esys
Hello Members
Line Base Variant Missing SWE ----------------------------------------------------- EPS btld_00000467-013_002_000 hwel_000009f2-002_003_001 hwap_000009f6-255_255_255 TAL execution started. ExecutionID=2019/08/09-07:41:01.254 [EPS - 30] - [Exception - EPS - 30] SVK-Ist does not match expected SGBMIDs for ecu ECUId:EPS_0x30. Excpected (relevant process classes only): [hwel_000009f2-002_002_002, hwap_000009f6-255_255_255], Actual (relevant process classes only): [hwel_000009f2-002_003_001, hwap_000009f6-255_255_255], Missing SGBMID(s): [hwel_000009f2-002_002_002], Surplus SGBMID(s): [hwel_000009f2-002_003_001] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "1min 0s". [C206] TAL execution started. ExecutionID=2019/08/09-07:49:35.467 [EPS - 30] - [Exception - EPS - 30] SVK-Ist does not match expected SGBMIDs for ecu ECUId:EPS_0x30. Excpected (relevant process classes only): [hwel_000009f2-002_003_000, hwap_000009f6-255_255_255, btld_00001089-006_000_000], Actual (relevant process classes only): [hwel_000009f2-002_003_001, hwap_000009f6-255_255_255, btld_00001089-006_000_000], Missing SGBMID(s): [hwel_000009f2-002_003_000], Surplus SGBMID(s): [hwel_000009f2-002_003_001] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "59s". [C206] .......................................................... There is no HWAP and HWEL in my Psdzdata folder. Anyone have these Process Class and their IDs? Im requesting Missing SGBMID: hwel_000009f2-002_003_000], hwap_000009f6-255_255_255, btld_00000467-013_002_000 i need these files |
|||
10-08-2019, 09:16 AM,
Post: #2
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
You should read something about what HWEL and HWAP class processes are.
|
|||
10-08-2019, 10:21 AM,
Post: #3
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
|
|||
10-08-2019, 13:41 PM,
Post: #4
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
|
|||
10-08-2019, 14:25 PM,
Post: #5
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
I think you set wrong shipment i-level or EPS was replaced
If I helped, please magic buttons thx+rep
|
|||
11-08-2019, 06:59 AM,
Post: #6
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
You can change shipment I-step or open Tal editor and edit Tal and delete next lines “Expected”
save Tal and flash again |
|||
12-08-2019, 05:57 AM,
Post: #7
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
Delete EPS in SVT soll before cal TAL, you will be fine.
|
|||
13-08-2019, 03:01 AM,
Post: #8
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
(12-08-2019, 05:57 AM)HU_man Wrote: Delete EPS in SVT soll before cal TAL, you will be fine.I have replaced the EPS with a used unit and you said i should delete "EPS" from SVT_Soll? Then after i edit the SVT_soll of removing "EPS" then save it and then load it then Then Calculate Tal.xml? So if i'm not wrong to say this: SVT_ist (Actual installation Table) will retain the actual EPS from factory and all its SWEs. If i delete "EPS" from SVT-soll then save it and then load it under KIS/SVT target, then after i calculate Tal.xml it would be fine to flash with or without "EPS" module? |
|||
14-08-2019, 20:42 PM,
Post: #9
|
|||
|
|||
Solved EPS Flashing in Esys RE: Requesting Missing : HWAP, HWEL for Esys
(13-08-2019, 03:01 AM)BMWF01 Wrote:I did not delete TRSVC nor EPS from svt_soll.(12-08-2019, 05:57 AM)HU_man Wrote: Delete EPS in SVT soll before cal TAL, you will be fine.I have replaced the EPS with a used unit and you said i should delete "EPS" from SVT_Soll? so instead i ask client to buy an ICOMA2 from China then: after ICOM arrived i connect to BMW F30 and Start -up Esys Pro>then connect BMW F30 via ICOM/Ethernet with IP of Tcp://169.254.92.38:50160> Then Establish connection. I click comfort mode on Esys>Then select target-selector for latest i-level target> Project=F020_19_07_539_004_002_000, vehicle info=F020 After connection is established: Read out FA? Then save FA>Then click read VCM>save as svt_ist>Then click Activate FA to expand Vehicle Profile: this will make active both the "I-step shipment" and "i-step Target" boxes>then click complete flash>Then click calculate SVT_Soll:after svt_soll as finish calculation?the click on "HWID- from SVT_actual">then save SVT_Soll>then click on Tal Calculate:After Tal has finish Calculation>save as Tal.xml This time no errors comes up for"TRSVC" SWEs missing. Then i click on Expert Mode>then click on TAL processing: Then select TAL.xml>then click on SVT_soll.xml [...]and load SVT_Soll>then click on Read FA out of VCM: Now on the ECU column: The Tal list showed the ECU for flashing in checked off boxes: created on ID Base row: Then click on All to uncheck all the ECU marked for flashing: then select only my client's EPS module in ECU column:>then make sure i checked SWdeploy and CDdeploy>for EPS: then check for software availability>Then if its says all SWEs are there> then click "START" to run the processing of the Transaction list (TAL.XML) and wait for the EPS to start flashing and encoding. Here is the video of the Process: https://www.youtube.com/watch?v=rHHzV3gA...e=youtu.be |
|||
Reputation: +1 - Yah [+1] | |||
17-08-2019, 14:29 PM,
Post: #10
|
|||
|
|||
RE: Requesting Missing : HWAP, HWEL for Esys
(13-08-2019, 03:01 AM)BMWF01 Wrote:Oh sorry , i think you flash another ecu then got error EPS request files(12-08-2019, 05:57 AM)HU_man Wrote: Delete EPS in SVT soll before cal TAL, you will be fine.I have replaced the EPS with a used unit and you said i should delete "EPS" from SVT_Soll? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content