Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bme F10 2013 key not work
04-10-2019, 04:20 AM,
(This post was last modified: 04-10-2019, 13:03 PM by Clusters.)
Post: #1
|
|||
|
|||
Bme F10 2013 key not work
Hello
bmw f10 after changing km in cas4 and dashboard the car key no longer works. start the engine with it but the doors do not open. vvdi2 does not give me any frequency. I changed the battery but still not working. what would be the problem? |
|||
04-10-2019, 06:24 AM,
Post: #2
|
|||
|
|||
RE: Bme F10 2013 key not work
Why not explain how you made the changes, what steps you used and what tools you used!!
Did you back up the cas4 data before doing all that? |
|||
04-10-2019, 15:20 PM,
Post: #3
|
|||
|
|||
RE: Bme F10 2013 key not work
the car starts.
only the closing door not work. I have only one key. I honestly didn't do the km. I do not know what was done. key before going, now does not emit the frequency at all. |
|||
10-10-2019, 10:15 AM,
(This post was last modified: 10-10-2019, 10:19 AM by keanu1979.)
Post: #4
|
|||
|
|||
RE: Bme F10 2013 key not work
can I reset the key with the hextag and rewrite it with vvdi2?
or I have to make a new key? |
|||
10-10-2019, 13:35 PM,
Post: #5
|
|||
|
|||
RE: Bme F10 2013 key not work
(10-10-2019, 10:15 AM)keanu1979 Wrote: can I reset the key with the hextag and rewrite it with vvdi2? I would never reset the only key to the car. Hextag is great at resetting keys though. Keys are cheap, add additional keys to test, don't erase your only key. Here are a couple things to test first. 1-use an RF key tester to make sure key is putting out a signal. 2-view ISTA live data for CAS to see if car is receiving signal. 3-flash the CAS. I had an F10 with non-working remote functions. Flashing fixed it. |
|||
11-10-2019, 00:00 AM,
Post: #6
|
|||
|
|||
RE: Bme F10 2013 key not work
I have another key from another f10. I want to reset that one. I read the dump on the bench and after a schedule.
I will try to flash them cas with ista d the key does not emit the frequency, I checked with vvdi2. everything happened after the km and dashboard modification. |
|||
11-10-2019, 08:44 AM,
Post: #7
|
|||
|
|||
RE: Bme F10 2013 key not work
Do not reset your only key. You are 95% likely to loose remote functions, even with hextag!!
|
|||
11-10-2019, 17:21 PM,
(This post was last modified: 11-10-2019, 17:22 PM by keanu1979.)
Post: #8
|
|||
|
|||
RE: Bme F10 2013 key not work
I have a key from the other bmw cas4.
I reset, and tomorrow I try to make programming if it does not go, try and flash on the module. a question, can i flash on cas4 with ista d programming? I can't read d flash with hextag from cas4 im give error: partition error -Ref 94e but I'll read p flash |
|||
11-10-2019, 19:45 PM,
(This post was last modified: 11-10-2019, 19:47 PM by mirceasandu.)
Post: #9
|
|||
|
|||
RE: Bme F10 2013 key not work
(11-10-2019, 08:44 AM)willisodhiambo Wrote: Do not reset your only key. You are 95% likely to loose remote functions, even with hextag!! Absolutely correct. Succesfuly reset 2 keys and program them on an F10 today and non of the remotes are working. More than that, the car will only start if I keep the key on the steering column. All of that was done with Autohex and Hextag. |
|||
12-10-2019, 08:09 AM,
Post: #10
|
|||
|
|||
RE: Bme F10 2013 key not work
(11-10-2019, 17:21 PM)keanu1979 Wrote: I have a key from the other bmw cas4. Which chip? XEP100 - you can play around XDP512 - A more secure chip, careful with that |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content