[TIGHTFIN]

Hello everyone. Replaced the FRM3R E81 BASIS light module with e81. There was a BASIS block in the car before replacement and the E87 BASIS module was installed, but from a different body x1, e84. Everything worked, except the windows. Then I encoded the FRM into default with an empty MAN file and they worked. But they work in spurts. And they don't go down when you open the door, although they should, since this is a hatchback coupe. Which parameter still needs to be encoded?

There are 2 errors in FRM3 now and the windows are lowered and raised in jerks:
0x9CC7 Hallsensor Power window driver door defect
0x9CC8 Hallsensor Power window passenger door defect

I attach the TRC FRM file. Thank you.

[brag288]

wont fix by coding.

---

why not repair your frm3?

[TIGHTFIN]

wont fix by coding.

---

why not repair your frm3?

there is a problem with the processor. Did not connect to it, even when connected directly

[bmchicago]

what is the part number of the old FRM and the new one?

[jaki]

Wrong frm!
Coupe and cabriolet needs totally different frm

[duss46]

Try changing parameter SNU_TK_ABFRAGE_OHNE_PULSE to nicht_aktiv.

[Maygur]

I think the problem is the incompatibility of the frm firmware. I think flashing the processor with the correct d-flash will solve the problems