[ziomiusas]

Hi guys,

Please do not judge, i am newbie in anything that comes to flashing or programming ECU.

I hope you could help me, or point me to the right direction. I want to program DPF off on:

Ford Galaxy 2013
2.0 TDCI (diesel) 140PS (103KW) 
ECU: Delphi DCM 3.5

I have read ECU with Chinese Kess V2. 

HW BG91-12A650-FHD
HW Ver. BG91-12A650-NE
SW BG91-14C204-FHD
SW Ver. 2911SA31070130
Spare Part BG91-12A650-FHD

Can someone program DPF off or point what software would be compatible with this ECU. This was first time i have tried to use WinOls, but looking at tutorials (Youtube) this ecu file is not even close to the one in tutorials. 

Please see file/link attached:



Thanks in advance

[nenadjoka]

this is where your fil tells you how to say hello

[ziomiusas]

I will try to flash this tomorrow and update. Thanks for help !!!

[ziomiusas]

Hi all, unfortunately still not good.

The issue is, that i received car without exhaust. I have bough another exhaust with DPF, however it comes with 2 temperature sensors, originally had 3 (find out only after fitting this one).

I am always getting following fault codes:

P20E4 - EGT sensor 2/3 bank 1 - correlation fault

Is there a way to disable EGT sensors or remove fault code, as programming DPF off has not helped.

Many thanks chaps

[nenadjoka]

try and report   good or not  good 

[ziomiusas]

Hi, still the same... i have tried to unplug sensors, no changes what so ever... i have deleted DTC's prior flashing too.

Could it be the case that it needs time to reset itself?

Thanks for any help

[Jurebv]

assuming dpf files are correct you need for DTC off for missing sensor, adress is 203ABA

Best Regards

[ziomiusas]

Hi Jurebv,

Can you please expand a bit more on this?

203ABA - is this a column/row in WinOLS? If so, which rows/colum s needs changing to new values?

Thanks

[ziomiusas]

Hi, DPF has been successfully removed from ECU. Admin can you please close Thread.

Thanks